3273372 Phoenix Contact Terminal Blocks

Product Details

• Potentials
  1
• Insulating material
  PA
• Overvoltage category
  III
• Number of connections
  13
• Color
  black/yellow
• Maximum load current
  57 A (with 10 mm² conductor cross section)
• Nominal voltage UN
  450 V
• Back of the hand protection
  guaranteed
• ASD level
  6.12 (m/s2)2/Hz
• Acceleration
  30g
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Number of levels
  1
• Flammability rating according to UL 94
  V0
• Insulating material group
  I
• Open side panel
  No
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Test spectrum
  Service life test category 2, bogie-mounted
• Shock form
  Half-sine
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  130 °C
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Stripping length
10 mm ... 12 mm
Conductor cross section AWG max.
8
Nominal cross section
2.5 mm²
Degree of pollution
3
Maximum power dissipation for nominal condition
1.31 W (the value is based on one connection block and is multiplied according to the pin assignment)
Oscillation, broadband noise test result
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock test result
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Note
Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
Nominal cross section feed-in
6 mm²
Rated surge voltage
6 kV
Nominal current IN
41 A (with 6 mm² conductor cross section)
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test duration per axis
5 h
Number of shocks per direction
3
Internal cylindrical gage
A3
Maximum total current
57 A (with 10 mm² conductor cross section)
Finger protection
guaranteed
Result of thermal test
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
18 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
28.6 mm
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Conductor cross section solid max.
10 mm²
Conductor cross section flexible min.
0.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 10.0.1
27141120
ECLASS 6.0
27141100
ECLASS 9.0
27141120
ETIM 6.0
EC000897
UNSPSC 19.0
39121410
Height
21.7 mm
Conductor cross section AWG min.
20
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Connection
Feed-in stage
Value
1 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141120
ECLASS 7.0
27141120
UNSPSC 12.01
39121410
UNSPSC 18.0
39121410
Min. AWG conductor cross section, flexible
20
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.1
27141121
ETIM 4.0
EC000897
UNSPSC 6.01
30211811
Width
41 mm
Connection in acc. with standard
IEC 60998-2-2
Conductor cross section flexible max.
10 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 4.0
27141121
ECLASS 5.1
27141120
ETIM 7.0
EC000897
UNSPSC 11
39121410
UNSPSC 13.2
39121410
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Connection method
Push-in connection
Conductor cross section solid min.
1 mm²
Max. AWG conductor cross section, flexible
10
Connection cross sections directly pluggable
1 mm² 10 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.0
27141120
ETIM 3.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 20.0
39121410
UNSPSC 21.0
39121410