3273328 Phoenix Contact Terminal Blocks

Product Details

• Rated surge voltage
  6 kV
• Degree of pollution
  3
• Maximum total current
  48 A
• Potentials
  1
• Insulating material
  PA
• Nominal voltage UN
  450 V
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Shock duration
  18 ms
• Number of shocks per direction
  3
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  28 MJ/kg
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Conductor cross section solid min.
  0.34 mm²
• Conductor cross section AWG max.
  12
• Conductor cross section flexible max.
  2.5 mm²
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  0.34 mm²
• Internal cylindrical gage
  A3
• ECLASS 10.0.1
  27141120
• ECLASS 6.0
  27141100
• ECLASS 5.1
  27141120
ETIM 4.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
Number of levels
1
Nominal cross section
2.5 mm²
Flammability rating according to UL 94
V0
Maximum power dissipation for nominal condition
0.77 W (the value is based on one connection block and is multiplied according to the pin assignment)
Open side panel
No
Oscillation, broadband noise test result
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock test result
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height
21.7 mm
Connection in acc. with standard
IEC 60998-2-2
Conductor cross section AWG min.
26
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.0
27141121
ECLASS 7.0
27141120
ETIM 6.0
EC000897
UNSPSC 18.0
39121410
UNSPSC 20.0
39121410
Note
Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
Color
black/yellow
Insulating material group
I
Maximum load current
32 A
Finger protection
guaranteed
ASD level
6.12 (m/s2)2/Hz
Test duration per axis
5 h
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Static insulating material application in cold
-60 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Width
46.9 mm
Conductor cross section solid max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Max. AWG conductor cross section, flexible
12
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.1
27141121
ECLASS 11.0
27141120
ETIM 3.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 11
39121410
UNSPSC 19.0
39121410
Number of connections
18
Overvoltage category
III
Nominal current IN
24 A
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Test spectrum
Service life test category 2, bogie-mounted
Acceleration
30g
Shock form
Half-sine
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Connection method
Push-in connection
Stripping length
8 mm ... 10 mm
Conductor cross section flexible min.
0.14 mm²
Connection cross sections directly pluggable
0.34 mm² 4 mm² 24 12
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 5.0
27141120
ECLASS 9.0
27141120
UNSPSC 7.0901
39121410
ETIM 7.0
EC000897
UNSPSC 13.2
39121410
Back of the hand protection
guaranteed
Length
28.6 mm