3273322 Phoenix Contact Terminal Blocks

Product Details

• Note
  Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
• Flammability rating according to UL 94
  V0
• Rated surge voltage
  6 kV
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Back of the hand protection
  guaranteed
• Test spectrum
  Service life test category 2, bogie-mounted
• Shock form
  Half-sine
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Height
  21.7 mm
• Conductor cross section solid min.
  0.34 mm²
• Conductor cross section AWG max.
  12
• Conductor cross section flexible min.
  0.14 mm²
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  2.5 mm²
• Operating temperature
  -60 °C ... 105 °C (max. short-term operating temperature 130°C)
• ECLASS 11.0
  27141120
• China RoHS
  Environmentally friendly use period: unlimited = EFUP-e
• ECLASS 5.1
  27141120
• ETIM 3.0
  EC000897
UNSPSC 19.0
39121410
Number of levels
1
Potentials
1
Overvoltage category
III
Maximum total current
48 A
Nominal voltage UN
450 V
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
ASD level
6.12 (m/s2)2/Hz
Test duration per axis
5 h
Shock duration
18 ms
Static insulating material application in cold
-60 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.0
27141121
ECLASS 6.0
27141100
ETIM 4.0
EC000897
ETIM 7.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410
Maximum load current
32 A
Open side panel
No
Finger protection
guaranteed
Acceleration
30g
Shock test result
Test passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
46.9 mm
Stripping length
8 mm ... 10 mm
Conductor cross section solid max.
4 mm²
Conductor cross section flexible max.
2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 5.0
27141120
ETIM 6.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 21.0
39121410
Number of connections
18
Insulating material
PA
Insulating material group
I
Maximum power dissipation for nominal condition
0.77 W (the value is based on one connection block and is multiplied according to the pin assignment)
Nominal current IN
24 A
Oscillation, broadband noise test result
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Connection method
Push-in connection
Conductor cross section AWG min.
26
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Internal cylindrical gage
A3
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.1
27141121
ECLASS 9.0
27141120
UNSPSC 7.0901
39121410
UNSPSC 13.2
39121410
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Max. AWG conductor cross section, flexible
12
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
ECLASS 10.0.1
27141120
ECLASS 7.0
27141120
UNSPSC 11
39121410
UNSPSC 18.0
39121410
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Nominal cross section
2.5 mm²
Degree of pollution
3
Number of shocks per direction
3
Color
black
Length
28.6 mm
Connection in acc. with standard
IEC 60998-2-2
Connection cross sections directly pluggable
0.34 mm² 4 mm² 24 12