3273318 Phoenix Contact Terminal Blocks

Product Details

• Acceleration
  30g
• Test duration per axis
  5 h
• Shock duration
  18 ms
• ECLASS 7.0
  27141120
• UNSPSC 6.01
  30211811
• Number of connections
  18
• Color
  brown
• Rated surge voltage
  6 kV
• Insulating material group
  I
• Maximum power dissipation for nominal condition
  0.77 W (the value is based on one connection block and is multiplied according to the pin assignment)
• Nominal voltage UN
  450 V
• Finger protection
  guaranteed
• Test spectrum
  Service life test category 2, bogie-mounted
• ETIM 3.0
  EC000897
• UNSPSC 7.0901
  39121410
• Number of levels
  1
• Nominal cross section
  2.5 mm²
• Insulating material
  PA
• Overvoltage category
  III
• Maximum total current
  48 A
Open side panel
No
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Oscillation, broadband noise test result
Test passed
ASD level
6.12 (m/s2)2/Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Static insulating material application in cold
-60 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
28.6 mm
Height
21.7 mm
Conductor cross section solid min.
0.34 mm²
Conductor cross section flexible max.
2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 11.0
27141120
ECLASS 5.1
27141120
ETIM 6.0
EC000897
UNSPSC 11
39121410
UNSPSC 18.0
39121410
UNSPSC 19.0
39121410
Note
Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
Potentials
1
Flammability rating according to UL 94
V0
Degree of pollution
3
Maximum load current
32 A
Nominal current IN
24 A
Back of the hand protection
guaranteed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock test result
Test passed
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock form
Half-sine
Surface flammability NFPA 130 (ASTM E 162)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
46.9 mm
Stripping length
8 mm ... 10 mm
Connection method
Push-in connection
Conductor cross section AWG max.
12
Conductor cross section AWG min.
26
Max. AWG conductor cross section, flexible
12
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Internal cylindrical gage
A3
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141120
ECLASS 4.1
27141121
ECLASS 5.0
27141120
ECLASS 9.0
27141120
ETIM 7.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410
UNSPSC 21.0
39121410
Number of shocks per direction
3
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection in acc. with standard
IEC 60998-2-2
Conductor cross section solid max.
4 mm²
Conductor cross section flexible min.
0.14 mm²
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Connection cross sections directly pluggable
0.34 mm² 4 mm² 24 12
Ambient temperature (assembly)
-5 °C ... 70 °C
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.0
27141121
ECLASS 6.0
27141100
ETIM 4.0
EC000897
UNSPSC 12.01
39121410