3273310 Phoenix Contact Terminal Blocks

Product Details

• Nominal cross section
  2.5 mm²
• Maximum power dissipation for nominal condition
  0.77 W (the value is based on one connection block and is multiplied according to the pin assignment)
• Open side panel
  No
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Test spectrum
  Service life test category 2, bogie-mounted
• Number of shocks per direction
  3
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Width
  46.9 mm
• Note
  Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
• Insulating material
  PA
• Overvoltage category
  III
• Nominal current IN
  24 A
• Oscillation, broadband noise test result
  Test passed
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Shock form
  Half-sine
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Internal cylindrical gage
  A3
• Potentials
  1
Color
blue
Degree of pollution
3
Maximum load current
32 A
Finger protection
guaranteed
Acceleration
30g
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Shock duration
18 ms
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height
21.7 mm
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Min. AWG conductor cross section, flexible
26
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Number of connections
18
Rated surge voltage
6 kV
Maximum total current
48 A
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
ASD level
6.12 (m/s2)2/Hz
Static insulating material application in cold
-60 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Length
28.6 mm
Conductor cross section solid max.
4 mm²
Conductor cross section solid min.
0.34 mm²
Max. AWG conductor cross section, flexible
12
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 6.0
27141100
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
Number of levels
1
Flammability rating according to UL 94
V0
Insulating material group
I
Nominal voltage UN
450 V
Back of the hand protection
guaranteed
Test duration per axis
5 h
Shock test result
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Stripping length
8 mm ... 10 mm
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Connection cross sections directly pluggable
0.34 mm² 4 mm² 24 12
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 10.0.1
27141120
ECLASS 5.0
27141120
ETIM 6.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
Connection method
Push-in connection
Connection in acc. with standard
IEC 60998-2-2
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141120
UNSPSC 20.0
39121410
Conductor cross section AWG min.
26
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
ECLASS 9.0
27141120
UNSPSC 19.0
39121410
Conductor cross section flexible min.
0.14 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.0
27141121
ETIM 3.0
EC000897
ETIM 4.0
EC000897
UNSPSC 11
39121410
Conductor cross section flexible max.
2.5 mm²
ECLASS 4.1
27141121
ETIM 7.0
EC000897
UNSPSC 18.0
39121410
ECLASS 5.1
27141120
ECLASS 7.0
27141120
UNSPSC 7.0901
39121410