3273300 Phoenix Contact Terminal Blocks

Product Details

• Note
  Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
• Insulating material
  PA
• Maximum power dissipation for nominal condition
  0.77 W (the value is based on one connection block and is multiplied according to the pin assignment)
• Nominal current IN
  24 A
• Oscillation, broadband noise test result
  Test passed
• Acceleration
  30g
• Shock form
  Half-sine
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  130 °C
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Length
  28.6 mm
• Connection in acc. with standard
  IEC 60998-2-2
• Conductor cross section flexible max.
  2.5 mm²
• Conductor cross section flexible, with ferrule with plastic sleeve min.
  0.34 mm²
• Number of levels
  1
• Color
  black
• Degree of pollution
  3
• Nominal voltage UN
  450 V
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• ASD level
  6.12 (m/s2)2/Hz
Shock test result
Test passed
Static insulating material application in cold
-60 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Stripping length
8 mm ... 10 mm
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 10.0.1
27141120
ECLASS 7.0
27141120
ETIM 6.0
EC000897
Potentials
1
Flammability rating according to UL 94
V0
Overvoltage category
III
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Finger protection
guaranteed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Width
31.5 mm
Conductor cross section solid max.
4 mm²
Conductor cross section AWG max.
12
Connection cross sections directly pluggable
0.34 mm² 4 mm² 24 12
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.1
27141121
ECLASS 5.1
27141120
UNSPSC 6.01
30211811
UNSPSC 21.0
39121410
Insulating material group
I
Maximum load current
32 A
Height
21.7 mm
Conductor cross section solid min.
0.34 mm²
Min. AWG conductor cross section, flexible
26
ETIM 4.0
EC000897
UNSPSC 11
39121410
UNSPSC 20.0
39121410
Nominal cross section
2.5 mm²
Maximum total current
48 A
Back of the hand protection
guaranteed
Test spectrum
Service life test category 2, bogie-mounted
Test directions
X-, Y- and Z-axis (pos. and neg.)
Number of shocks per direction
3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Conductor cross section AWG min.
26
Max. AWG conductor cross section, flexible
12
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 11.0
27141120
ECLASS 6.0
27141100
UNSPSC 12.01
39121410
Rated surge voltage
6 kV
Test duration per axis
5 h
Shock duration
18 ms
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Connection method
Push-in connection
Internal cylindrical gage
A3
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.0
27141120
ECLASS 9.0
27141120
ETIM 7.0
EC000897
UNSPSC 18.0
39121410
Open side panel
No
ECLASS 4.0
27141121
UNSPSC 13.2
39121410
Number of connections
12
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ETIM 3.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410