3273296 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  1
• Number of connections
  12
• Potentials
  1
• Rated surge voltage
  6 kV
• Maximum load current
  32 A
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Shock form
  Half-sine
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  130 °C
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Length
  28.6 mm
• Conductor cross section solid min.
  0.34 mm²
• Conductor cross section AWG min.
  26
• Color
  brown
• Maximum total current
  48 A
• Overvoltage category
  III
• Finger protection
  guaranteed
• Acceleration
  30g
Note
Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
Insulating material
PA
Degree of pollution
3
Nominal current IN
24 A
Back of the hand protection
guaranteed
ASD level
6.12 (m/s2)2/Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height
21.7 mm
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Connection cross sections directly pluggable
0.34 mm² 4 mm² 24 12
Ambient temperature (assembly)
-5 °C ... 70 °C
Nominal cross section
2.5 mm²
Maximum power dissipation for nominal condition
0.77 W (the value is based on one connection block and is multiplied according to the pin assignment)
Open side panel
No
Oscillation, broadband noise test result
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Number of shocks per direction
3
Shock duration
18 ms
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection method
Push-in connection
UNSPSC 20.0
39121410
Nominal voltage UN
450 V
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Stripping length
8 mm ... 10 mm
Flammability rating according to UL 94
V0
Shock test result
Test passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Conductor cross section solid max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 4.0
27141121
ECLASS 11.0
27141120
ECLASS 7.0
27141120
UNSPSC 11
39121410
UNSPSC 13.2
39121410
UNSPSC 18.0
39121410
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Width
31.5 mm
Conductor cross section AWG max.
12
Conductor cross section flexible max.
2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.0
27141120
ECLASS 9.0
27141120
ETIM 6.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 21.0
39121410
Test duration per axis
5 h
Connection in acc. with standard
IEC 60998-2-2
Max. AWG conductor cross section, flexible
12
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.1
27141121
ECLASS 6.0
27141100
UNSPSC 6.01
30211811
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410
Insulating material group
I
Static insulating material application in cold
-60 °C
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Internal cylindrical gage
A3
ECLASS 10.0.1
27141120
ECLASS 5.1
27141120
ETIM 3.0
EC000897
ETIM 4.0
EC000897
ETIM 7.0
EC000897