3273282 Phoenix Contact Terminal Blocks

Product Details

• Color
  orange
• Overvoltage category
  III
• Back of the hand protection
  guaranteed
• Acceleration
  30g
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• Length
  28.6 mm
• Conductor cross section AWG max.
  12
• Conductor cross section solid max.
  4 mm²
• Conductor cross section flexible max.
  2.5 mm²
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  2.5 mm²
• Internal cylindrical gage
  A3
• Ambient temperature (assembly)
  -5 °C ... 70 °C
• ECLASS 5.0
  27141120
• ECLASS 9.0
  27141120
• ETIM 4.0
  EC000897
• UNSPSC 12.01
  39121410
• UNSPSC 21.0
  39121410
• Note
  Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
• Nominal cross section
  2.5 mm²
Flammability rating according to UL 94
V0
Maximum load current
32 A
Nominal current IN
24 A
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock duration
18 ms
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Width
16 mm
Connection method
Push-in connection
Conductor cross section flexible min.
0.14 mm²
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.1
27141121
ETIM 6.0
EC000897
ECLASS 7.0
27141120
UNSPSC 20.0
39121410
Potentials
1
Rated surge voltage
6 kV
Maximum power dissipation for nominal condition
0.77 W (the value is based on one connection block and is multiplied according to the pin assignment)
Open side panel
No
Oscillation, broadband noise test result
Test passed
Test duration per axis
5 h
Shock test result
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Conductor cross section solid min.
0.34 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 6.0
27141100
ETIM 7.0
EC000897
UNSPSC 11
39121410
Number of levels
1
Insulating material
PA
Insulating material group
I
Nominal voltage UN
450 V
Finger protection
guaranteed
ASD level
6.12 (m/s2)2/Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock form
Half-sine
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Stripping length
8 mm ... 10 mm
Conductor cross section AWG min.
26
Connection cross sections directly pluggable
0.34 mm² 4 mm² 24 12
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 11.0
27141120
ECLASS 10.0.1
27141120
ECLASS 5.1
27141120
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
UNSPSC 19.0
39121410
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Number of connections
6
Degree of pollution
3
Maximum total current
48 A
Test spectrum
Service life test category 2, bogie-mounted
Number of shocks per direction
3
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height
21.7 mm
Connection in acc. with standard
IEC 60998-2-2
Max. AWG conductor cross section, flexible
12
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 4.0
27141121
ETIM 3.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 13.2
39121410