3273260 Phoenix Contact Terminal Blocks

Product Details

• Note
  The max. load current must not be exceeded by the total current of all connected conductors.
• Nominal cross section feed-in
  6 mm²
• Number of levels
  1
• Nominal cross section
  2.5 mm²
• Insulating material
  PA
• Maximum load current
  57 A (with 10 mm² conductor cross section)
• Nominal voltage UN
  690 V
• Back of the hand protection
  guaranteed
• Bending test conductor cross section/weight
  0.5 mm² / 0.3 kg
• Short circuit stability result
  Test passed
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Oscillation, broadband noise test result
  Test passed
• Acceleration
  30g
• Number of shocks per direction
  3
• Width
  56.5 mm
• Number of connections
  19
• Insulating material group
  I
• Nominal current IN
  41 A (with 6 mm² conductor cross section)
• Finger protection
  guaranteed
• Result of power-frequency withstand voltage test
  Test passed
Result of tight fit on support
Test passed
Result of voltage-drop test
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of aging test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Shock form
Half-sine
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Length
45.7 mm
Conductor cross section solid min.
1 mm²
Conductor cross section flexible min.
0.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.0
27141121
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
Connection
Feed-in stage
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section solid max.
10 mm²
Conductor cross section flexible max.
10 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.0
27141120
ECLASS 7.0
27141120
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410
Stripping length
10 mm ... 12 mm
Conductor cross section AWG max.
8
Max. AWG conductor cross section, flexible
10
Value
1 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 9.0
27141120
ETIM 7.0
EC000897
UNSPSC 11
39121410
UNSPSC 21.0
39121410
Flammability rating according to UL 94
V0
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of flexion and pull-out test
Test passed
Result of temperature-rise test
Test passed
Color
orange
Overvoltage category
III
Power frequency withstand voltage setpoint
1.89 kV
Tensile test result
Test passed
Short-time current
1.2 kA
Test duration per axis
5 h
Shock duration
18 ms
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Connection in acc. with standard
IEC 60947-7-1
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
ETIM 3.0
EC000897
Rated surge voltage
8 kV
Maximum total current
57 A (with 10 mm² conductor cross section)
Bending test rotation speed
10 rpm
Tight fit on carrier
NS 35
Result of thermal test
Test passed
Shock test result
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/7,5
30.9 mm
ECLASS 6.0
27141100
Degree of pollution
3
Maximum power dissipation for nominal condition
1.31 W (the value is based on one connection block and is multiplied according to the pin assignment)
Open side panel
No
Result of surge voltage test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Setpoint
5 N
Ageing test for screwless modular terminal block temperature cycles
192
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Connection method
Push-in connection
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141120
ETIM 6.0
EC000897
UNSPSC 18.0
39121410
Potentials
1
Bending test turns
135
Conductor cross section short circuit testing
10 mm²
ASD level
6.12 (m/s2)2/Hz
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Conductor cross section AWG min.
20
Min. AWG conductor cross section, flexible
20
Connection cross sections directly pluggable
1 mm² 10 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
ECLASS 11.0
27141120
ECLASS 5.1
27141120
ETIM 4.0
EC000897
UNSPSC 12.01
39121410
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test directions
X-, Y- and Z-axis (pos. and neg.)
Internal cylindrical gage
A3
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.1
27141121
UNSPSC 20.0
39121410