3273236 Phoenix Contact Terminal Blocks

Product Details

• Note
  The max. load current must not be exceeded by the total current of all connected conductors.
• Nominal cross section feed-in
  6 mm²
• Degree of pollution
  3
• Maximum total current
  57 A (with 10 mm² conductor cross section)
• Back of the hand protection
  guaranteed
• Result of thermal test
  Test passed
• Number of connections
  13
• Insulating material
  PA
• Insulating material group
  I
• Nominal voltage UN
  690 V
• Result of surge voltage test
  Test passed
• Result of flexion and pull-out test
  Test passed
• Tensile test result
  Test passed
• Nominal cross section
  2.5 mm²
• Flammability rating according to UL 94
  V0
• Maximum load current
  57 A (with 10 mm² conductor cross section)
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Result of power-frequency withstand voltage test
  Test passed
• Bending test turns
  135
• Number of levels
  1
Color
violet
Overvoltage category
III
Nominal current IN
41 A (with 6 mm² conductor cross section)
Finger protection
guaranteed
Bending test rotation speed
10 rpm
Result of voltage-drop test
Test passed
Result of aging test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Shock duration
18 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Stripping length
10 mm ... 12 mm
ECLASS 5.1
27141120
Potentials
1
Rated surge voltage
8 kV
Maximum power dissipation for nominal condition
1.31 W (the value is based on one connection block and is multiplied according to the pin assignment)
Open side panel
No
Power frequency withstand voltage setpoint
1.89 kV
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Setpoint
5 N
Result of temperature-rise test
Test passed
Short-time current
1.2 kA
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Number of shocks per direction
3
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Width
41 mm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section flexible max.
10 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.0
27141121
ETIM 6.0
EC000897
UNSPSC 11
39121410
UNSPSC 20.0
39121410
Tight fit on carrier
NS 35
Short circuit stability result
Test passed
Oscillation, broadband noise test result
Test passed
Acceleration
30g
Shock test result
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height NS 35/7,5
30.9 mm
Conductor cross section flexible min.
0.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Value
1 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 10.0.1
27141120
ECLASS 4.1
27141121
ETIM 4.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Ageing test for screwless modular terminal block temperature cycles
192
Proof of thermal characteristics (needle flame) effective duration
30 s
Test duration per axis
5 h
Shock form
Half-sine
Static insulating material application in cold
-60 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Connection method
Push-in connection
Conductor cross section solid max.
10 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Connection
Feed-in stage
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 9.0
27141120
ETIM 7.0
EC000897
UNSPSC 18.0
39121410
ECLASS 5.0
27141120
Length
45.7 mm
Conductor cross section solid min.
1 mm²
Conductor cross section AWG min.
20
Max. AWG conductor cross section, flexible
10
Internal cylindrical gage
A3
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141120
ECLASS 6.0
27141100
ECLASS 7.0
27141120
UNSPSC 7.0901
39121410
UNSPSC 13.2
39121410
Conductor cross section AWG max.
8
Min. AWG conductor cross section, flexible
20
Connection cross sections directly pluggable
1 mm² 10 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ETIM 3.0
EC000897
UNSPSC 19.0
39121410
Conductor cross section short circuit testing
10 mm²
ASD level
6.12 (m/s2)2/Hz
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Result of tight fit on support
Test passed
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg