3273222 Phoenix Contact Terminal Blocks

Product Details

• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Nominal current IN
  41 A (with 6 mm² conductor cross section)
• Result of power-frequency withstand voltage test
  Test passed
• Bending test turns
  135
• Result of temperature-rise test
  Test passed
• Back of the hand protection
  guaranteed
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Result of voltage-drop test
  Test passed
• Conductor cross section short circuit testing
  10 mm²
• Oscillation, broadband noise test result
  Test passed
• Test spectrum
  Service life test category 2, bogie-mounted
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Finger protection
  guaranteed
• Power frequency withstand voltage setpoint
  1.89 kV
• Bending test conductor cross section/weight
  0.5 mm² / 0.3 kg
• Setpoint
  5 N
• Result of surge voltage test
  Test passed
• Result of flexion and pull-out test
  Test passed
• Result of tight fit on support
  Test passed
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
Result of thermal test
Test passed
Acceleration
30g
Shock test result
Test passed
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Width
41 mm
Height NS 35/7,5
30.9 mm
Conductor cross section flexible min.
0.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Internal cylindrical gage
A3
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 10.0.1
27141120
ECLASS 4.0
27141121
ECLASS 4.1
27141121
ETIM 4.0
EC000897
UNSPSC 11
39121410
Open side panel
No
Bending test rotation speed
10 rpm
Tight fit on carrier
NS 35
Tensile test result
Test passed
Short-time current
1.2 kA
Proof of thermal characteristics (needle flame) effective duration
30 s
Test directions
X-, Y- and Z-axis (pos. and neg.)
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock form
Half-sine
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Stripping length
10 mm ... 12 mm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.0
27141120
ECLASS 7.0
27141120
UNSPSC 7.0901
39121410
UNSPSC 20.0
39121410
Ageing test for screwless modular terminal block temperature cycles
192
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Length
45.7 mm
Conductor cross section solid min.
1 mm²
Conductor cross section flexible max.
10 mm²
Connection cross sections directly pluggable
1 mm² 10 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Shock duration
18 ms
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Conductor cross section AWG min.
20
Conductor cross section AWG max.
8
Conductor cross section solid max.
10 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
ECLASS 5.1
27141120
Connection method
Push-in connection
Max. AWG conductor cross section, flexible
10
Min. AWG conductor cross section, flexible
20
Test duration per axis
5 h
ETIM 6.0
EC000897
UNSPSC 13.2
39121410
Number of levels
1
Insulating material
PA
Insulating material group
I
Result of aging test
Test passed
Number of connections
13
Flammability rating according to UL 94
V0
Rated surge voltage
8 kV
Nominal voltage UN
690 V
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Connection
Feed-in stage
ETIM 3.0
EC000897
UNSPSC 19.0
39121410
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Nominal cross section
2.5 mm²
Degree of pollution
3
Maximum power dissipation for nominal condition
1.31 W (the value is based on one connection block and is multiplied according to the pin assignment)
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Value
1 mm²
ECLASS 11.0
27141120
Potentials
1
Color
blue
Overvoltage category
III
Maximum total current
57 A (with 10 mm² conductor cross section)
Short circuit stability result
Test passed
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 6.0
27141100
ETIM 7.0
EC000897
UNSPSC 12.01
39121410
Nominal cross section feed-in
6 mm²
Maximum load current
57 A (with 10 mm² conductor cross section)
ASD level
6.12 (m/s2)2/Hz
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 9.0
27141120
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
UNSPSC 21.0
39121410