3273193 Phoenix Contact Terminal Blocks

Product Details

• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Potentials
  1
• Insulating material group
  I
• Nominal voltage UN
  690 V
• Result of power-frequency withstand voltage test
  Test passed
• Bending test rotation speed
  10 rpm
• Result of tight fit on support
  Test passed
• Setpoint
  1 N
• Ageing test for screwless modular terminal block temperature cycles
  192
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Number of shocks per direction
  3
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Conductor cross section solid min.
  0.34 mm²
• Nominal cross section
  2.5 mm²
• Flammability rating according to UL 94
  V0
• Maximum load current
  32 A
• Finger protection
  guaranteed
• Result of flexion and pull-out test
  Test passed
Tensile test result
Test passed
Result of voltage-drop test
Test passed
Short-time current
0.48 kA
Oscillation, broadband noise test result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height NS 35/7,5
30.9 mm
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Color
pink
Rated surge voltage
8 kV
Nominal current IN
24 A
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of temperature-rise test
Test passed
Conductor cross section short circuit testing
4 mm²
Result of aging test
Test passed
ASD level
6.12 (m/s2)2/Hz
Shock form
Half-sine
Static insulating material application in cold
-60 °C
Width
46.9 mm
Length
45.7 mm
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.0
27141121
ECLASS 9.0
27141120
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
Number of levels
1
Insulating material
PA
Degree of pollution
3
Maximum total current
48 A
Back of the hand protection
guaranteed
Power frequency withstand voltage setpoint
1.89 kV
Bending test turns
135
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of thermal test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Shock test result
Test passed
Shock duration
18 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Connection method
Push-in connection
Conductor cross section solid max.
4 mm²
Conductor cross section flexible min.
0.14 mm²
Connection cross sections directly pluggable
0.34 mm² 4 mm² 24 12
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141120
ECLASS 11.0
27141120
ETIM 3.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410
Number of connections
18
Overvoltage category
III
Open side panel
No
Result of surge voltage test
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Tight fit on carrier
NS 35
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Acceleration
30g
Test duration per axis
5 h
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Stripping length
8 mm ... 10 mm
Connection in acc. with standard
IEC 60947-7-1
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 6.0
27141100
ETIM 4.0
EC000897
ETIM 7.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Internal cylindrical gage
A3
ECLASS 5.0
27141120
ECLASS 5.1
27141120
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.1
27141121
ECLASS 7.0
27141120
ETIM 6.0
EC000897
UNSPSC 20.0
39121410
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Conductor cross section AWG min.
26
Ambient temperature (assembly)
-5 °C ... 70 °C
Max. AWG conductor cross section, flexible
14
Ambient temperature (actuation)
-5 °C ... 70 °C
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Maximum power dissipation for nominal condition
0.77 W (the value is based on one connection block and is multiplied according to the pin assignment)
Conductor cross section flexible max.
2.5 mm²