3273172 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  12
• Flammability rating according to UL 94
  V0
• Maximum load current
  32 A
• Finger protection
  guaranteed
• Result of flexion and pull-out test
  Test passed
• Setpoint
  1 N
• Ageing test for screwless modular terminal block temperature cycles
  192
• Test spectrum
  Service life test category 2, bogie-mounted
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Width
  31.5 mm
• Stripping length
  8 mm ... 10 mm
• Conductor cross section solid max.
  4 mm²
• Conductor cross section flexible min.
  0.14 mm²
• Conductor cross section flexible, with ferrule with plastic sleeve min.
  0.34 mm²
• Internal cylindrical gage
  A3
• Ambient temperature (assembly)
  -5 °C ... 70 °C
• ECLASS 4.1
  27141121
• ECLASS 4.0
  27141121
ETIM 6.0
EC000897
UNSPSC 11
39121410
UNSPSC 20.0
39121410
Potentials
1
Rated surge voltage
8 kV
Maximum power dissipation for nominal condition
0.77 W (the value is based on one connection block and is multiplied according to the pin assignment)
Nominal current IN
24 A
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of surge voltage test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Short circuit stability result
Test passed
Result of thermal test
Test passed
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section solid min.
0.34 mm²
Min. AWG conductor cross section, flexible
26
Max. AWG conductor cross section, flexible
14
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 10.0.1
27141120
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 7.0
27141120
UNSPSC 7.0901
39121410
ETIM 7.0
EC000897
UNSPSC 13.2
39121410
Number of levels
1
Insulating material
PA
Overvoltage category
III
Nominal voltage UN
690 V
Bending test rotation speed
10 rpm
Result of voltage-drop test
Test passed
Conductor cross section short circuit testing
4 mm²
Result of aging test
Test passed
Nominal cross section
2.5 mm²
Degree of pollution
3
Maximum total current
48 A
Result of power-frequency withstand voltage test
Test passed
Bending test turns
135
Result of tight fit on support
Test passed
Result of temperature-rise test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Acceleration
30g
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Number of shocks per direction
3
Height NS 35/7,5
30.9 mm
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Connection cross sections directly pluggable
0.34 mm² 4 mm² 24 12
Permissible humidity (storage/transport)
30 % ... 70 %
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.0
27141120
ECLASS 9.0
27141120
ETIM 4.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 19.0
39121410
UNSPSC 21.0
39121410
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Color
orange
Insulating material group
I
Open side panel
No
Back of the hand protection
guaranteed
Power frequency withstand voltage setpoint
1.89 kV
Tensile test result
Test passed
Conductor cross section AWG min.
26
Conductor cross section flexible max.
2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141120
ECLASS 5.1
27141120
ECLASS 6.0
27141100
ETIM 3.0
EC000897
UNSPSC 18.0
39121410
UNSPSC 12.01
39121410
Tight fit on carrier
NS 35
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
ASD level
6.12 (m/s2)2/Hz
Shock duration
18 ms
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Connection method
Push-in connection
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
45.7 mm
Short-time current
0.48 kA
Oscillation, broadband noise test result
Test passed
Shock test result
Test passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Test duration per axis
5 h
Shock form
Half-sine
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3