3273116 Phoenix Contact Terminal Blocks

Product Details

• Note
  The max. load current must not be exceeded by the total current of all connected conductors.
• Nominal cross section
  2.5 mm²
• Nominal cross section feed-in
  6 mm²
• Degree of pollution
  3
• Potentials
  1
• Number of connections
  19
• Color
  yellow
• Overvoltage category
  III
• Maximum load current
  57 A (with 10 mm² conductor cross section)
• Finger protection
  guaranteed
• Result of surge voltage test
  Test passed
• Tensile test result
  Test passed
• Number of levels
  1
• Insulating material
  PA
• Rated surge voltage
  8 kV
• UNSPSC 21.0
  39121410
• Insulating material group
  I
• Open side panel
  No
• Back of the hand protection
  guaranteed
• Result of flexion and pull-out test
  Test passed
Result of voltage-drop test
Test passed
Short-time current
1.2 kA
Result of thermal test
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Maximum total current
57 A (with 10 mm² conductor cross section)
Nominal current IN
41 A (with 6 mm² conductor cross section)
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test turns
135
Result of temperature-rise test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test duration per axis
5 h
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Length
58.1 mm
Height NS 15
30.4 mm
Conductor cross section flexible max.
10 mm²
Connection cross sections directly pluggable
1 mm² 10 mm²
Value
1 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.1
27141120
ECLASS 9.0
27141120
ETIM 7.0
EC000897
UNSPSC 20.0
39121410
Nominal voltage UN
690 V
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Power frequency withstand voltage setpoint
1.89 kV
Setpoint
5 N
Result of tight fit on support
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Acceleration
30g
Shock duration
18 ms
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Stripping length
10 mm ... 12 mm
Conductor cross section flexible min.
0.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Connection
Feed-in stage
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 10.0.1
27141120
ETIM 4.0
EC000897
ETIM 6.0
EC000897
UNSPSC 19.0
39121410
Maximum power dissipation for nominal condition
1.31 W (the value is based on one connection block and is multiplied according to the pin assignment)
Bending test rotation speed
10 rpm
Tight fit on carrier
NS 35
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test spectrum
Service life test category 2, bogie-mounted
ASD level
6.12 (m/s2)2/Hz
Shock test result
Test passed
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height NS 35/7,5
32.4 mm
Connection method
Push-in connection
Conductor cross section AWG min.
20
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Internal cylindrical gage
A3
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.0
27141121
ETIM 3.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 11
39121410
Flammability rating according to UL 94
V0
Result of power-frequency withstand voltage test
Test passed
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Conductor cross section short circuit testing
10 mm²
Result of aging test
Test passed
Oscillation, broadband noise test result
Test passed
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock form
Half-sine
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Width
28.6 mm
Conductor cross section solid min.
1 mm²
Conductor cross section solid max.
10 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 11.0
27141120
ECLASS 5.0
27141120
ECLASS 7.0
27141120
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section AWG max.
8
Max. AWG conductor cross section, flexible
10
Min. AWG conductor cross section, flexible
20
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.1
27141121
ECLASS 6.0
27141100
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410