3273484 Phoenix Contact Terminal Blocks

Product Details

• Rated surge voltage
  6 kV
• Insulating material group
  I
• Color
  blue
• Number of connections
  13
• Nominal cross section
  2.5 mm²
• Potentials
  1
• Overvoltage category
  III
• Nominal current IN
  41 A (with 6 mm² conductor cross section)
• Maximum total current
  57 A (with 10 mm² conductor cross section)
• Back of the hand protection
  guaranteed
• Test spectrum
  Service life test category 2, bogie-mounted
• ASD level
  6.12 (m/s2)2/Hz
• Shock form
  Half-sine
• Number of shocks per direction
  3
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• Height
  22.7 mm
• Stripping length
  10 mm ... 12 mm
• Number of levels
  1
• Nominal cross section feed-in
  6 mm²
Degree of pollution
3
Maximum power dissipation for nominal condition
1.31 W (the value is based on one connection block and is multiplied according to the pin assignment)
Open side panel
No
Finger protection
guaranteed
Oscillation, broadband noise test result
Test passed
Acceleration
30g
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section solid min.
1 mm²
Connection method
Push-in connection
Conductor cross section solid max.
10 mm²
Min. AWG conductor cross section, flexible
20
Connection cross sections directly pluggable
1 mm² 10 mm²
Operating temperature
-35 °C ... 105 °C (max. short-term operating temperature 130°C)
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141120
ECLASS 9.0
27141120
ECLASS 6.0
27141100
ETIM 7.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410
Note
Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
Insulating material
PA
Flammability rating according to UL 94
V0
Maximum load current
57 A (with 10 mm² conductor cross section)
Nominal voltage UN
450 V
Result of thermal test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test directions
X-, Y- and Z-axis (pos. and neg.)
Test duration per axis
5 h
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Width
41 mm
Connection in acc. with standard
IEC 60998-2-2
Conductor cross section flexible min.
0.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.1
27141120
ETIM 3.0
EC000897
UNSPSC 11
39121410
UNSPSC 18.0
39121410
UNSPSC 21.0
39121410
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.0
27141121
ECLASS 5.0
27141120
ETIM 6.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
Value
1 mm²
ECLASS 11.0
27141120
ECLASS 4.1
27141121
ECLASS 7.0
27141120
ETIM 4.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410
Shock duration
18 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Proof of thermal characteristics (needle flame) effective duration
30 s
Shock test result
Test passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Conductor cross section flexible max.
10 mm²
Max. AWG conductor cross section, flexible
10
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Internal cylindrical gage
A3
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Length
28.6 mm
Conductor cross section AWG max.
8
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Conductor cross section AWG min.
20
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Connection
Feed-in stage