3273108 Phoenix Contact Terminal Blocks

3273108 Product Details

• Potentials
  1
• Nominal cross section feed-in
  6 mm²
• Degree of pollution
  3
• Maximum power dissipation for nominal condition
  1.31 W (the value is based on one connection block and is multiplied according to the pin assignment)
• Result of surge voltage test
  Test passed
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Result of power-frequency withstand voltage test
  Test passed
• Bending test turns
  135
• Setpoint
  5 N
• Conductor cross section short circuit testing
  10 mm²
• Result of aging test
  Test passed
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Shock test result
  Test passed
• Shock duration
  18 ms
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  28 MJ/kg
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Height NS 15
  30.4 mm
• Stripping length
  10 mm ... 12 mm
• Conductor cross section flexible max.
  10 mm²
• Conductor cross section AWG min.
  20
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Color
black/yellow
Number of levels
1
Acceleration
30g
Test spectrum
Service life test category 2, bogie-mounted
Number of shocks per direction
3
Surface flammability NFPA 130 (ASTM E 162)
passed
Nominal cross section
2.5 mm²
Rated surge voltage
8 kV
Nominal current IN
41 A (with 6 mm² conductor cross section)
Maximum load current
57 A (with 10 mm² conductor cross section)
Back of the hand protection
guaranteed
Finger protection
guaranteed
Bending test rotation speed
10 rpm
Tight fit on carrier
NS 35
Short circuit stability result
Test passed
Result of temperature-rise test
Test passed
Number of connections
13
Flammability rating according to UL 94
V0
Maximum total current
57 A (with 10 mm² conductor cross section)
Insulating material group
I
Open side panel
No
Power frequency withstand voltage setpoint
1.89 kV
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of tight fit on support
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Short-time current
1.2 kA
Ageing test for screwless modular terminal block temperature cycles
192
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock form
Half-sine
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Width
28.6 mm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section AWG max.
8
Connection cross sections directly pluggable
1 mm² 10 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.1
27141121
ECLASS 6.0
27141100
ETIM 3.0
EC000897
ETIM 7.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 18.0
39121410
Insulating material
PA
Overvoltage category
III
Nominal voltage UN
690 V
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Result of flexion and pull-out test
Test passed
Tensile test result
Test passed
Result of voltage-drop test
Test passed
Result of thermal test
Test passed
Oscillation, broadband noise test result
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Test duration per axis
5 h
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Length
58.1 mm
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section solid max.
10 mm²
Min. AWG conductor cross section, flexible
20
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Connection
Feed-in stage
UNSPSC 11
39121410
Ambient temperature (actuation)
-5 °C ... 70 °C
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141121
ECLASS 5.1
27141120
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410
Proof of thermal characteristics (needle flame) effective duration
30 s
ASD level
6.12 (m/s2)2/Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Connection method
Push-in connection
Height NS 35/7,5
32.4 mm
Conductor cross section solid min.
1 mm²
Conductor cross section flexible min.
0.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Max. AWG conductor cross section, flexible
10
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 11.0
27141120
ECLASS 5.0
27141120
ETIM 4.0
EC000897
ETIM 6.0
EC000897
UNSPSC 19.0
39121410
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Internal cylindrical gage
A3
Value
1 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 10.0.1
27141120
ECLASS 9.0
27141120
ECLASS 7.0
27141120
UNSPSC 7.0901
39121410
UNSPSC 21.0
39121410

Product condition