3273104 Phoenix Contact Terminal Blocks

3273104 Product Details

• Note
  The max. load current must not be exceeded by the total current of all connected conductors.
• Nominal cross section feed-in
  6 mm²
• Degree of pollution
  3
• Maximum load current
  57 A (with 10 mm² conductor cross section)
• Nominal current IN
  41 A (with 6 mm² conductor cross section)
• Back of the hand protection
  guaranteed
• Power frequency withstand voltage setpoint
  1.89 kV
• Bending test turns
  135
• Result of voltage-drop test
  Test passed
• Short-time current
  1.2 kA
• Test spectrum
  Service life test category 2, bogie-mounted
• Shock form
  Half-sine
• Shock test result
  Test passed
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  130 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Length
  58.1 mm
• Connection in acc. with standard
  IEC 60947-7-1
• Conductor cross section AWG max.
  8
• Max. AWG conductor cross section, flexible
  10
• Internal cylindrical gage
  A3
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.0
27141121
ECLASS 7.0
27141120
ETIM 6.0
EC000897
UNSPSC 11
39121410
UNSPSC 20.0
39121410
Result of tight fit on support
Test passed
Short circuit stability result
Test passed
Result of aging test
Test passed
Acceleration
30g
Test directions
X-, Y- and Z-axis (pos. and neg.)
Surface flammability NFPA 130 (ASTM E 162)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Height NS 35/7,5
32.4 mm
Conductor cross section solid min.
1 mm²
Conductor cross section flexible max.
10 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Connection cross sections directly pluggable
1 mm² 10 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.0
27141120
ETIM 3.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Number of levels
1
Color
violet
Flammability rating according to UL 94
V0
Overvoltage category
III
Open side panel
No
Result of surge voltage test
Test passed
Result of flexion and pull-out test
Test passed
Tensile test result
Test passed
Result of temperature-rise test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test duration per axis
5 h
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Static insulating material application in cold
-60 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Height NS 15
30.4 mm
Conductor cross section AWG min.
20
Min. AWG conductor cross section, flexible
20
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
Potentials
1
Insulating material
PA
Insulating material group
I
Maximum total current
57 A (with 10 mm² conductor cross section)
Nominal voltage UN
690 V
Finger protection
guaranteed
Bending test rotation speed
10 rpm
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Setpoint
5 N
Ageing test for screwless modular terminal block temperature cycles
192
Result of thermal test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Shock duration
18 ms
Number of shocks per direction
3
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Connection method
Push-in connection
Conductor cross section flexible min.
0.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Value
1 mm²
ECLASS 11.0
27141120
ECLASS 5.1
27141120
ETIM 4.0
EC000897
ECLASS 9.0
27141120
ETIM 7.0
EC000897
UNSPSC 19.0
39121410
Nominal cross section
2.5 mm²
Number of connections
13
Rated surge voltage
8 kV
Maximum power dissipation for nominal condition
1.31 W (the value is based on one connection block and is multiplied according to the pin assignment)
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of power-frequency withstand voltage test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tight fit on carrier
NS 35
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Conductor cross section short circuit testing
10 mm²
Oscillation, broadband noise test result
Test passed
ASD level
6.12 (m/s2)2/Hz
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Width
28.6 mm
Stripping length
10 mm ... 12 mm
Conductor cross section solid max.
10 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Connection
Feed-in stage
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 10.0.1
27141120
ECLASS 4.1
27141121
ECLASS 6.0
27141100
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
UNSPSC 12.01
39121410

Product condition