3273102 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  13
• Flammability rating according to UL 94
  V0
• Maximum power dissipation for nominal condition
  1.31 W (the value is based on one connection block and is multiplied according to the pin assignment)
• Nominal voltage UN
  690 V
• Result of power-frequency withstand voltage test
  Test passed
• Result of surge voltage test
  Test passed
• Bending test conductor cross section/weight
  0.5 mm² / 0.3 kg
• Result of voltage-drop test
  Test passed
• Short circuit stability result
  Test passed
• Result of thermal test
  Test passed
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Oscillation, broadband noise test result
  Test passed
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Shock duration
  18 ms
• Static insulating material application in cold
  -60 °C
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  28 MJ/kg
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Note
  The max. load current must not be exceeded by the total current of all connected conductors.
• Nominal cross section
  2.5 mm²
• Degree of pollution
  3
Maximum load current
57 A (with 10 mm² conductor cross section)
Back of the hand protection
guaranteed
Power frequency withstand voltage setpoint
1.89 kV
Bending test rotation speed
10 rpm
Tensile test result
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Nominal cross section feed-in
6 mm²
Insulating material group
I
Maximum total current
57 A (with 10 mm² conductor cross section)
Open side panel
No
Finger protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of tight fit on support
Test passed
Tight fit on carrier
NS 35
Short-time current
1.2 kA
Test spectrum
Service life test category 2, bogie-mounted
ASD level
6.12 (m/s2)2/Hz
Shock form
Half-sine
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Length
58.1 mm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section flexible max.
10 mm²
Number of levels
1
Insulating material
PA
Nominal current IN
41 A (with 6 mm² conductor cross section)
Result of flexion and pull-out test
Test passed
Bending test turns
135
Setpoint
5 N
Result of temperature-rise test
Test passed
Conductor cross section short circuit testing
10 mm²
Result of aging test
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock test result
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/7,5
32.4 mm
Height NS 15
30.4 mm
Conductor cross section AWG min.
20
Color
black
Rated surge voltage
8 kV
UNSPSC 19.0
39121410
Proof of thermal characteristics (needle flame) effective duration
30 s
Ageing test for screwless modular terminal block temperature cycles
192
Test duration per axis
5 h
Acceleration
30g
Number of shocks per direction
3
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Width
28.6 mm
Stripping length
10 mm ... 12 mm
Conductor cross section AWG max.
8
Conductor cross section flexible min.
0.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Connection method
Push-in connection
Conductor cross section solid min.
1 mm²
Conductor cross section solid max.
10 mm²
Min. AWG conductor cross section, flexible
20
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Internal cylindrical gage
A3
Connection cross sections directly pluggable
1 mm² 10 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 10.0.1
27141120
ECLASS 5.0
27141120
ETIM 3.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
Potentials
1
Connection
Feed-in stage
Value
1 mm²
ECLASS 4.0
27141121
UNSPSC 20.0
39121410
Overvoltage category
III
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
ECLASS 5.1
27141120
ECLASS 9.0
27141120
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 11.0
27141120
ECLASS 6.0
27141100
ETIM 7.0
EC000897
ETIM 6.0
EC000897
UNSPSC 11
39121410
UNSPSC 18.0
39121410
Max. AWG conductor cross section, flexible
10
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.1
27141121
ECLASS 7.0
27141120
ETIM 4.0
EC000897
UNSPSC 12.01
39121410