3273086 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  7
• Flammability rating according to UL 94
  V0
• Maximum power dissipation for nominal condition
  1.31 W (the value is based on one connection block and is multiplied according to the pin assignment)
• Test duration per axis
  5 h
• Nominal current IN
  41 A (with 6 mm² conductor cross section)
• Result of flexion and pull-out test
  Test passed
• Tensile test result
  Test passed
• Result of temperature-rise test
  Test passed
• Result of voltage-drop test
  Test passed
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Shock test result
  Test passed
• Note
  The max. load current must not be exceeded by the total current of all connected conductors.
• Insulating material
  PA
• Insulating material group
  I
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Result of power-frequency withstand voltage test
  Test passed
• Bending test turns
  135
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Conductor cross section short circuit testing
  10 mm²
• Oscillation, broadband noise test result
  Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
18 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Nominal cross section
2.5 mm²
Rated surge voltage
8 kV
Nominal voltage UN
690 V
Back of the hand protection
guaranteed
Result of surge voltage test
Test passed
Result of tight fit on support
Test passed
Setpoint
5 N
Result of thermal test
Test passed
Result of aging test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Number of shocks per direction
3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 15
30.4 mm
Number of levels
1
Color
black/yellow
Overvoltage category
III
Maximum total current
57 A (with 10 mm² conductor cross section)
Finger protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test rotation speed
10 rpm
Tight fit on carrier
NS 35
Short-time current
1.2 kA
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock form
Half-sine
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Stripping length
10 mm ... 12 mm
Potentials
1
Degree of pollution
3
Open side panel
No
Short circuit stability result
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Proof of thermal characteristics (needle flame) effective duration
30 s
Acceleration
30g
Maximum load current
57 A (with 10 mm² conductor cross section)
Power frequency withstand voltage setpoint
1.89 kV
ASD level
6.12 (m/s2)2/Hz
Static insulating material application in cold
-60 °C
Height NS 35/7,5
32.4 mm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section AWG min.
20
Min. AWG conductor cross section, flexible
20
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Length
58.1 mm
Conductor cross section solid min.
1 mm²
Conductor cross section solid max.
10 mm²
Conductor cross section flexible max.
10 mm²
Internal cylindrical gage
A3
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Value
1 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141120
ECLASS 7.0
27141120
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
UNSPSC 18.0
39121410
Nominal cross section feed-in
6 mm²
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Conductor cross section flexible min.
0.5 mm²
Max. AWG conductor cross section, flexible
10
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.1
27141121
ECLASS 5.1
27141120
ECLASS 9.0
27141120
ETIM 6.0
EC000897
UNSPSC 19.0
39121410
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Width
28.6 mm
Connection method
Push-in connection
Conductor cross section AWG max.
8
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Connection cross sections directly pluggable
1 mm² 10 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 10.0.1
27141120
ECLASS 6.0
27141100
ECLASS 5.0
27141120
ETIM 4.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410
UNSPSC 21.0
39121410
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Connection
Feed-in stage
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.0
27141121
ETIM 3.0
EC000897
ETIM 7.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 11
39121410