3273030 Phoenix Contact Terminal Blocks

Product Details

• Potentials
  1
• Flammability rating according to UL 94
  V0
• Result of surge voltage test
  Test passed
• Bending test conductor cross section/weight
  0.14 mm² / 0.2 kg
• Conductor cross section short circuit testing
  4 mm²
• Number of shocks per direction
  3
• Static insulating material application in cold
  -60 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Connection method
  Push-in connection
• Conductor cross section flexible min.
  0.14 mm²
• Conductor cross section solid max.
  4 mm²
• Conductor cross section flexible, with ferrule without plastic sleeve max.
  2.5 mm²
• China RoHS
  Environmentally friendly use period: unlimited = EFUP-e
• ECLASS 4.0
  27141121
• ECLASS 5.1
  27141120
• ETIM 7.0
  EC000897
• UNSPSC 11
  39121410
• Nominal cross section
  2.5 mm²
• Degree of pollution
  3
• Maximum power dissipation for nominal condition
  0.77 W (the value is based on one connection block and is multiplied according to the pin assignment)
Back of the hand protection
guaranteed
Finger protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of tight fit on support
Test passed
Short circuit stability result
Test passed
Oscillation, broadband noise test result
Test passed
Acceleration
30g
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Rated surge voltage
8 kV
Maximum load current
32 A
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Bending test turns
135
Result of voltage-drop test
Test passed
Setpoint
1 N
Result of thermal test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test directions
X-, Y- and Z-axis (pos. and neg.)
Test duration per axis
5 h
Shock test result
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Width
28.6 mm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section solid min.
0.34 mm²
Connection cross sections directly pluggable
0.34 mm² 4 mm² 24 12
Ambient temperature (actuation)
-5 °C ... 70 °C
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 7.0
27141120
ECLASS 9.0
27141120
UNSPSC 19.0
39121410
UNSPSC 13.2
39121410
Number of levels
1
Color
green
Insulating material group
I
Nominal current IN
24 A
Result of power-frequency withstand voltage test
Test passed
Result of flexion and pull-out test
Test passed
Tensile test result
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Short-time current
0.48 kA
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Height NS 35/7,5
32.4 mm
Conductor cross section AWG min.
26
Conductor cross section flexible max.
2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141120
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
UNSPSC 20.0
39121410
Number of connections
12
Insulating material
PA
Overvoltage category
III
Nominal voltage UN
690 V
Open side panel
No
Power frequency withstand voltage setpoint
1.89 kV
Bending test rotation speed
10 rpm
Result of temperature-rise test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Result of aging test
Test passed
Shock duration
18 ms
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Surface flammability NFPA 130 (ASTM E 162)
passed
Length
58.1 mm
Stripping length
8 mm ... 10 mm
Max. AWG conductor cross section, flexible
14
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Internal cylindrical gage
A3
ECLASS 4.1
27141121
ECLASS 6.0
27141100
ETIM 3.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
ASD level
6.12 (m/s2)2/Hz
Shock form
Half-sine
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 15
30.4 mm
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
ECLASS 10.0.1
27141120
ECLASS 5.0
27141120
ETIM 4.0
EC000897
ETIM 6.0
EC000897
UNSPSC 18.0
39121410
Tight fit on carrier
NS 35
Min. AWG conductor cross section, flexible
26
Test spectrum
Service life test category 2, bogie-mounted
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Maximum total current
48 A