3273012 Phoenix Contact Terminal Blocks

Product Details

• ECLASS 7.0
  27141120
• Number of levels
  1
• Flammability rating according to UL 94
  V0
• Maximum power dissipation for nominal condition
  0.77 W (the value is based on one connection block and is multiplied according to the pin assignment)
• Open side panel
  No
• Number of connections
  6
• Overvoltage category
  III
• Maximum load current
  32 A
• Finger protection
  guaranteed
• Bending test turns
  135
• Setpoint
  1 N
• Short circuit stability result
  Test passed
• Result of aging test
  Test passed
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  130 °C
• Width
  28.6 mm
• Conductor cross section solid min.
  0.34 mm²
• Conductor cross section flexible max.
  2.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141120
ETIM 3.0
EC000897
UNSPSC 11
39121410
UNSPSC 20.0
39121410
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Insulating material
PA
Degree of pollution
3
Nominal current IN
24 A
Back of the hand protection
guaranteed
Result of flexion and pull-out test
Test passed
Result of voltage-drop test
Test passed
Result of tight fit on support
Test passed
Result of temperature-rise test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Acceleration
30g
Shock form
Half-sine
Number of shocks per direction
3
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/7,5
32.4 mm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 5.0
27141120
Nominal cross section
2.5 mm²
Rated surge voltage
8 kV
Nominal voltage UN
690 V
Maximum total current
48 A
Power frequency withstand voltage setpoint
1.89 kV
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Tight fit on carrier
NS 35
Conductor cross section short circuit testing
4 mm²
Proof of thermal characteristics (needle flame) effective duration
30 s
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Conductor cross section solid max.
4 mm²
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141121
ETIM 4.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
Potentials
1
Color
white
Insulating material group
I
Result of surge voltage test
Test passed
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tensile test result
Test passed
Result of thermal test
Test passed
Oscillation, broadband noise test result
Test passed
ASD level
6.12 (m/s2)2/Hz
Shock test result
Test passed
Shock duration
18 ms
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Length
58.1 mm
Stripping length
8 mm ... 10 mm
Conductor cross section AWG min.
26
Max. AWG conductor cross section, flexible
14
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Internal cylindrical gage
A3
ECLASS 10.0.1
27141120
ECLASS 4.1
27141121
ECLASS 6.0
27141100
ETIM 6.0
EC000897
UNSPSC 13.2
39121410
Result of power-frequency withstand voltage test
Test passed
Bending test rotation speed
10 rpm
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Short-time current
0.48 kA
Test spectrum
Service life test category 2, bogie-mounted
Test duration per axis
5 h
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 15
30.4 mm
Conductor cross section AWG max.
12
Connection cross sections directly pluggable
0.34 mm² 4 mm² 24 12
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.1
27141120
ETIM 7.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
ECLASS 9.0
27141120
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Connection method
Push-in connection