3273776 Phoenix Contact Terminal Blocks

Product Details

• Nominal cross section feed-in
  10 mm²
• Insulating material group
  I
• Open side panel
  No
• Nominal cross section
  4 mm²
• Rated surge voltage
  6 kV
• Maximum load current
  63 A
• Finger protection
  guaranteed
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Bending test turns
  135
• Note
  The max. load current must not be exceeded by the total current of all connected conductors.
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Result of aging test
  Test passed
• Test spectrum
  Service life test category 2, bogie-mounted
• ASD level
  6.12 (m/s2)2/Hz
• Test duration per axis
  5 h
• Number of connections
  19
• Flammability rating according to UL 94
  V0
• Nominal voltage UN
  800 V
• Power frequency withstand voltage setpoint
  2 kV
• Tensile test result
  Test passed
Setpoint
5 N
Conductor cross section short circuit testing
10 mm²
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Shock test result
Test passed
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Stripping length
12 mm ... 14 mm
Connection in acc. with standard
IEC 60947-7-1
Min. AWG conductor cross section, flexible
20
Internal cylindrical gage
A4
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (assembly)
-5 °C ... 70 °C
Number of levels
1
Color
green
Degree of pollution
3
Nominal current IN
32 A
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of power-frequency withstand voltage test
Test passed
Result of flexion and pull-out test
Test passed
Tight fit on carrier
NS 35
Result of voltage-drop test
Test passed
Short-time current
1.2 kA
Result of thermal test
Test passed
Oscillation, broadband noise test result
Test passed
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
45.7 mm
Conductor cross section solid max.
16 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
10 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ETIM 3.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410
Potentials
1
Insulating material
PA
Overvoltage category
III
Maximum total current
63 A
Result of surge voltage test
Test passed
Bending test rotation speed
10 rpm
Result of tight fit on support
Test passed
Short circuit stability result
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Connection method
Push-in connection
Conductor cross section flexible min.
0.5 mm²
Max. AWG conductor cross section, flexible
8
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
4 mm²
Connection
Feed-in stage
Value
1 mm²
ECLASS 6.0
27141100
ECLASS 9.0
27141120
UNSPSC 6.01
30211811
UNSPSC 12.01
39121410
Back of the hand protection
guaranteed
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Result of temperature-rise test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Acceleration
30g
Shock duration
18 ms
Shock form
Half-sine
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
64.8 mm
Height NS 35/7,5
30.9 mm
Conductor cross section AWG min.
20
Conductor cross section flexible max.
10 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
10 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.0
27141121
ECLASS 4.1
27141121
ECLASS 7.0
27141120
ETIM 7.0
EC000897
UNSPSC 20.0
39121410
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section solid min.
0.5 mm²
Conductor cross section AWG max.
6
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Connection cross sections directly pluggable
0.5 mm² 16 mm²
ECLASS 10.0.1
27141120
ECLASS 5.1
27141120
ETIM 6.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 18.0
39121410
UNSPSC 21.0
39121410
ECLASS 11.0
27141120
ECLASS 5.0
27141120
ETIM 4.0
EC000897
UNSPSC 11
39121410