3273738 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  1
• Nominal cross section
  4 mm²
• Nominal current IN
  32 A
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Power frequency withstand voltage setpoint
  2 kV
• Bending test rotation speed
  10 rpm
• Result of tight fit on support
  Test passed
• Short circuit stability result
  Test passed
• Oscillation, broadband noise test result
  Test passed
• Acceleration
  30g
• Shock form
  Half-sine
• Shock duration
  18 ms
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Connection
  Feed-in stage
• Conductor cross section solid min.
  0.5 mm²
• Conductor cross section flexible min.
  0.2 mm²
• Conductor cross section solid max.
  6 mm²
• Nominal cross section feed-in
  10 mm²
Flammability rating according to UL 94
V0
Maximum load current
41 A
Maximum total current
63 A
Finger protection
guaranteed
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Result of voltage-drop test
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Proof of thermal characteristics (needle flame) effective duration
30 s
Test spectrum
Service life test category 2, bogie-mounted
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Height NS 35/7,5
30.9 mm
Conductor cross section AWG max.
10
Number of connections
7
Color
black
Degree of pollution
3
Back of the hand protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Short-time current
1.2 kA
Result of aging test
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test duration per axis
5 h
Number of shocks per direction
3
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Width
27.9 mm
Stripping length
10 mm ... 12 mm
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.2 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
Ambient temperature (assembly)
-5 °C ... 70 °C
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 5.1
27141120
ETIM 6.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410
Potentials
1
Insulating material
PA
Overvoltage category
III
Nominal voltage UN
800 V
Result of flexion and pull-out test
Test passed
Tensile test result
Test passed
Tight fit on carrier
NS 35
Conductor cross section short circuit testing
10 mm²
Ageing test for screwless modular terminal block temperature cycles
192
ASD level
6.12 (m/s2)2/Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Static insulating material application in cold
-60 °C
Length
45.7 mm
Connection method
Push-in connection
Conductor cross section AWG min.
24
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Connection cross sections directly pluggable
0.5 mm² 6 mm² 20 10
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 4.0
27141121
ECLASS 10.0.1
27141120
ECLASS 9.0
27141120
UNSPSC 6.01
30211811
UNSPSC 11
39121410
UNSPSC 20.0
39121410
Rated surge voltage
6 kV
Insulating material group
I
Open side panel
No
Result of surge voltage test
Test passed
Bending test turns
135
Setpoint
5 N
Result of temperature-rise test
Test passed
Result of thermal test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Shock test result
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Connection in acc. with standard
IEC 60998-2-2
Min. AWG conductor cross section, flexible
24
Max. AWG conductor cross section, flexible
12
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.2 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
Value
0.75 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.1
27141121
ECLASS 6.0
27141100
ECLASS 7.0
27141120
ETIM 4.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 19.0
39121410
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Internal cylindrical gage
A4
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 11.0
27141120
ECLASS 5.0
27141120
ETIM 3.0
EC000897
ETIM 7.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410