3273468 Phoenix Contact Terminal Blocks

Product Details

• Result of thermal test
  Test passed
• Open side panel
  No
• Number of connections
  7
• Insulating material
  PA
• Rated surge voltage
  6 kV
• Maximum power dissipation for nominal condition
  1.31 W (the value is based on one connection block and is multiplied according to the pin assignment)
• Back of the hand protection
  guaranteed
• Oscillation, broadband noise test result
  Test passed
• ASD level
  6.12 (m/s2)2/Hz
• Shock test result
  Test passed
• Static insulating material application in cold
  -60 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Height
  22.7 mm
• Conductor cross section AWG max.
  8
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  0.5 mm²
• Internal cylindrical gage
  A3
• Value
  1 mm²
• ECLASS 11.0
  27141120
• ECLASS 9.0
  27141120
• UNSPSC 12.01
  39121410
Note
Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
Nominal cross section
2.5 mm²
Flammability rating according to UL 94
V0
Insulating material group
I
Maximum total current
57 A (with 10 mm² conductor cross section)
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test duration per axis
5 h
Shock form
Half-sine
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Width
25.6 mm
Connection in acc. with standard
IEC 60998-2-2
Conductor cross section AWG min.
20
Max. AWG conductor cross section, flexible
10
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 10.0.1
27141120
ECLASS 5.1
27141120
ETIM 6.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 20.0
39121410
Potentials
1
Color
green
Degree of pollution
3
Maximum load current
57 A (with 10 mm² conductor cross section)
Nominal voltage UN
450 V
Test spectrum
Service life test category 2, bogie-mounted
Acceleration
30g
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Surface flammability NFPA 130 (ASTM E 162)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Stripping length
10 mm ... 12 mm
Conductor cross section solid max.
10 mm²
Min. AWG conductor cross section, flexible
20
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Connection cross sections directly pluggable
1 mm² 10 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.0
27141120
ECLASS 6.0
27141100
UNSPSC 6.01
30211811
UNSPSC 18.0
39121410
UNSPSC 21.0
39121410
Number of levels
1
Nominal cross section feed-in
6 mm²
Overvoltage category
III
Nominal current IN
41 A (with 6 mm² conductor cross section)
Finger protection
guaranteed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Connection method
Push-in connection
Conductor cross section flexible max.
10 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.1
27141121
ETIM 3.0
EC000897
UNSPSC 19.0
39121410
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Length
28.6 mm
Conductor cross section solid min.
1 mm²
Conductor cross section flexible min.
0.5 mm²
Connection
Feed-in stage
Operating temperature
-35 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 7.0
27141120
ETIM 7.0
EC000897
ETIM 4.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 11
39121410
Shock duration
18 ms
Test directions
X-, Y- and Z-axis (pos. and neg.)
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
ECLASS 4.0
27141121