3273728 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  1
• Nominal cross section feed-in
  10 mm²
• Rated surge voltage
  6 kV
• Maximum total current
  63 A
• Number of connections
  7
• Color
  red
• Degree of pollution
  3
• Overvoltage category
  III
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Nominal cross section
  4 mm²
• Flammability rating according to UL 94
  V0
• Back of the hand protection
  guaranteed
• Potentials
  1
• Insulating material group
  I
• Nominal current IN
  32 A
• Nominal voltage UN
  800 V
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Bending test conductor cross section/weight
  0.5 mm² / 0.3 kg
• Insulating material
  PA
• Maximum load current
  41 A
Open side panel
No
Result of surge voltage test
Test passed
Bending test turns
135
Result of voltage-drop test
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Oscillation, broadband noise test result
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Connection
Feed-in stage
Conductor cross section AWG min.
24
Ageing test for screwless modular terminal block temperature cycles
192
Shock duration
18 ms
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Surface flammability NFPA 130 (ASTM E 162)
passed
Conductor cross section solid min.
0.5 mm²
Connection in acc. with standard
IEC 60998-2-2
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 6.0
27141100
UNSPSC 6.01
30211811
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410
Finger protection
guaranteed
Setpoint
5 N
Short circuit stability result
Test passed
Result of aging test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Shock test result
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Connection method
Push-in connection
Conductor cross section flexible max.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.1
27141121
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410
Bending test rotation speed
10 rpm
Result of tight fit on support
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock form
Half-sine
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Width
27.9 mm
Height NS 35/7,5
30.9 mm
Min. AWG conductor cross section, flexible
24
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Result of power-frequency withstand voltage test
Test passed
Tensile test result
Test passed
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Test spectrum
Service life test category 2, bogie-mounted
Test duration per axis
5 h
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section AWG max.
10
Conductor cross section solid max.
6 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.2 mm²
Connection cross sections directly pluggable
0.5 mm² 6 mm² 20 10
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 11.0
27141120
ECLASS 7.0
27141120
ETIM 6.0
EC000897
Power frequency withstand voltage setpoint
2 kV
Tight fit on carrier
NS 35
Short-time current
1.2 kA
Conductor cross section short circuit testing
10 mm²
Acceleration
30g
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Length
45.7 mm
Conductor cross section flexible min.
0.2 mm²
Value
0.75 mm²
ECLASS 4.0
27141121
ECLASS 5.1
27141120
ETIM 4.0
EC000897
UNSPSC 11
39121410
Result of flexion and pull-out test
Test passed
Result of temperature-rise test
Test passed
Result of thermal test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
ASD level
6.12 (m/s2)2/Hz
Stripping length
10 mm ... 12 mm
Max. AWG conductor cross section, flexible
12
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.2 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ETIM 3.0
EC000897
ETIM 7.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Internal cylindrical gage
A4
ECLASS 10.0.1
27141120
ECLASS 5.0
27141120
ECLASS 9.0
27141120
UNSPSC 20.0
39121410