3273646 Phoenix Contact Terminal Blocks

Product Details

• Potentials
  1
• Color
  brown
• Flammability rating according to UL 94
  V0
• Maximum load current
  63 A
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Bending test rotation speed
  10 rpm
• Result of tight fit on support
  Test passed
• Result of temperature-rise test
  Test passed
• Result of thermal test
  Test passed
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Shock test result
  Test passed
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Width
  28.6 mm
• Connection
  Feed-in stage
• Stripping length
  10 mm ... 12 mm
• Conductor cross section AWG max.
  10
• Connection cross sections directly pluggable
  0.5 mm² 6 mm² 20 10
• Internal cylindrical gage
  A4
• ECLASS 4.1
  27141121
ECLASS 9.0
27141120
UNSPSC 6.01
30211811
UNSPSC 21.0
39121410
Nominal cross section feed-in
10 mm²
Degree of pollution
3
Maximum total current
63 A
Result of surge voltage test
Test passed
Tensile test result
Test passed
Result of voltage-drop test
Test passed
Conductor cross section short circuit testing
10 mm²
Result of aging test
Test passed
ASD level
6.12 (m/s2)2/Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 5.0
27141120
ECLASS 6.0
27141100
ETIM 7.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 18.0
39121410
Number of levels
1
Nominal cross section
4 mm²
Rated surge voltage
6 kV
Insulating material group
I
Value
0.75 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 11.0
27141120
ECLASS 7.0
27141120
ETIM 4.0
EC000897
UNSPSC 12.01
39121410
Number of connections
19
Insulating material
PA
Overvoltage category
III
Open side panel
No
Power frequency withstand voltage setpoint
2 kV
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 10.0.1
27141120
ETIM 3.0
EC000897
ETIM 6.0
EC000897
UNSPSC 11
39121410
UNSPSC 20.0
39121410
Nominal voltage UN
800 V
Finger protection
guaranteed
Back of the hand protection
guaranteed
Result of flexion and pull-out test
Test passed
Tight fit on carrier
NS 35
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Proof of thermal characteristics (needle flame) effective duration
30 s
Test spectrum
Service life test category 2, bogie-mounted
Acceleration
30g
Shock duration
18 ms
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Conductor cross section solid min.
0.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.0
27141121
ECLASS 5.1
27141120
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410
Short-time current
1.2 kA
Test duration per axis
5 h
Height NS 15
30.4 mm
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Number of shocks per direction
3
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Max. AWG conductor cross section, flexible
12
Result of power-frequency withstand voltage test
Test passed
Short circuit stability result
Test passed
Oscillation, broadband noise test result
Test passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Length
58.1 mm
Connection in acc. with standard
IEC 60998-2-2
Min. AWG conductor cross section, flexible
24
Bending test turns
135
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Setpoint
5 N
Ageing test for screwless modular terminal block temperature cycles
192
Shock form
Half-sine
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection method
Push-in connection
Conductor cross section AWG min.
24
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.2 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
Nominal current IN
32 A
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Static insulating material application in cold
-60 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/7,5
32.4 mm
Conductor cross section solid max.
6 mm²
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.2 mm²