Bryan Obida

Live support:

Monday - Friday 6AM - 6PM PST

3273636 Phoenix Contact Terminal Blocks

Phoenix Contact 3273636 Distribution block, connection method: Push-in connection, Push-in connection, number of connections: 19, cross section: 0.5 mm² - 10 mm², AWG: 20 - 6, width: 28.6 mm, color: gray, mounting type: NS 35/7,5, NS 35/15
Phoenix Contact

Part#:3273636

Manufacturer:Phoenix Contact

Product Lifecycle:Active

In-stock parts: 329

Nov 2, 2024

Distribution block, connection method: Push-in connection, Push-in connection, number of connections: 19, cross section: 0.5 mm² - 10 mm², AWG: 20 - 6, width: 28.6 mm, color: gray, mounting type: NS 35/7,5, NS 35/15

About the manufacturer: Phoenix Contact is one of the manufacturers that offers Terminal Blocks that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.

Check out the 3273636 Phoenix Contact price in the box on the right side or send a quick quote.

Product Details

  • Potentials
    1
  • Rated surge voltage
    6 kV
  • Maximum total current
    63 A
  • Back of the hand protection
    guaranteed
  • Result of flexion and pull-out test
    Test passed
  • Bending test turns
    135
  • Note
    The max. load current must not be exceeded by the total current of all connected conductors.
  • Requirement temperature-rise test
    Increase in temperature ≤ 45 K
  • Ageing test for screwless modular terminal block temperature cycles
    192
  • Test frequency
    f1 = 5 Hz to f2 = 250 Hz
  • Nominal cross section
    4 mm²
  • Number of connections
    19
  • Nominal cross section feed-in
    10 mm²
  • Degree of pollution
    3
  • Nominal current IN
    32 A
  • Open side panel
    No
  • Result of power-frequency withstand voltage test
    Test passed
  • Result of tight fit on support
    Test passed
  • Short circuit stability result
    Test passed
  • Result of aging test
    Test passed
  • ASD level
    6.12 (m/s2)2/Hz
  • Relative insulation material temperature index (Elec., UL 746 B)
    130 °C
  • Specific optical density of smoke NFPA 130 (ASTM E 662)
    passed
  • Fire protection for rail vehicles (DIN EN 45545-2) R24
    HL 1 - HL 3
  • Height NS 35/7,5
    32.4 mm
  • Connection method
    Push-in connection
  • Insulating material
    PA
  • Maximum load current
    63 A
  • Nominal voltage UN
    800 V
  • Finger protection
    guaranteed
  • Bending test rotation speed
    10 rpm
  • Result of voltage-drop test
    Test passed
  • Conductor cross section short circuit testing
    10 mm²
  • Result of thermal test
    Test passed
  • Test directions
    X-, Y- and Z-axis (pos. and neg.)
  • Shock duration
    18 ms
  • Smoke gas toxicity NFPA 130 (SMP 800C)
    passed
  • Fire protection for rail vehicles (DIN EN 45545-2) R26
    HL 1 - HL 3
  • Connection
    Feed-in stage
  • Connection in acc. with standard
    IEC 60998-2-2
  • Conductor cross section solid min.
    0.5 mm²
  • Internal cylindrical gage
    A4
  • Number of levels
    1
  • Color
    gray
  • Overvoltage category
    III
  • Result of surge voltage test
    Test passed
  • Power frequency withstand voltage setpoint
    2 kV
  • Tensile test result
    Test passed
  • Setpoint
    5 N
  • Proof of thermal characteristics (needle flame) effective duration
    30 s
  • Test duration per axis
    5 h
  • Test specification, shock test
    DIN EN 50155 (VDE 0115-200):2008-03
  • Static insulating material application in cold
    -60 °C
  • Fire protection for rail vehicles (DIN EN 45545-2) R23
    HL 1 - HL 3
  • Length
    58.1 mm
  • Stripping length
    10 mm ... 12 mm
  • Conductor cross section solid max.
    6 mm²
  • Conductor cross section flexible max.
    4 mm²
  • Shock protection test specification
    DIN EN 50274 (VDE 0660-514):2002-11
  • Result of the test for mechanical stability of terminal points (5 x conductor connection)
    Test passed
  • Short-time current
    1.2 kA
  • Test specification, oscillation, broadband noise
    DIN EN 50155 (VDE 0115-200):2008-03
  • Test spectrum
    Service life test category 2, bogie-mounted
  • Acceleration
    30g
  • Number of shocks per direction
    3
  • Calorimetric heat release NFPA 130 (ASTM E 1354)
    28 MJ/kg
  • Fire protection for rail vehicles (DIN EN 45545-2) R22
    HL 1 - HL 3
  • Width
    28.6 mm
  • Height NS 15
    30.4 mm
  • Conductor cross section AWG min.
    24
  • Conductor cross section flexible, with ferrule without plastic sleeve min.
    0.2 mm²
  • Min. AWG conductor cross section, flexible
    24
  • Conductor cross section flexible, with ferrule without plastic sleeve max.
    4 mm²
  • Conductor cross section flexible, with ferrule with plastic sleeve max.
    4 mm²
  • Operating temperature
    -60 °C ... 105 °C (max. short-term operating temperature 130°C)
  • Ambient temperature (actuation)
    -5 °C ... 70 °C
  • ECLASS 7.0
    27141120
  • Shock form
    Half-sine
  • Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
    130 °C
  • Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
    0.5 mm²
  • China RoHS
    Environmentally friendly use period: unlimited = EFUP-e
  • ECLASS 10.0.1
    27141120
  • ECLASS 11.0
    27141120
  • ECLASS 9.0
    27141120
  • ETIM 4.0
    EC000897
  • UNSPSC 7.0901
    39121410
  • UNSPSC 20.0
    39121410
  • Result of temperature-rise test
    Test passed
  • Shock test result
    Test passed
  • Max. AWG conductor cross section, flexible
    12
  • Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
    1 mm²
  • Connection cross sections directly pluggable
    0.5 mm² 6 mm² 20 10
  • Ambient temperature (storage/transport)
    -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
  • Ambient temperature (assembly)
    -5 °C ... 70 °C
  • ECLASS 4.1
    27141121
  • UNSPSC 6.01
    30211811
  • UNSPSC 11
    39121410
  • UNSPSC 19.0
    39121410
  • UNSPSC 21.0
    39121410
  • Insulating material group
    I
  • Conductor cross section flexible min.
    0.2 mm²
  • Conductor cross section flexible, with ferrule with plastic sleeve min.
    0.2 mm²
  • ECLASS 5.1
    27141120
  • ECLASS 6.0
    27141100
  • ETIM 6.0
    EC000897
  • UNSPSC 12.01
    39121410
  • Flammability rating according to UL 94
    V0
  • Bending test conductor cross section/weight
    0.5 mm² / 0.3 kg
  • Tight fit on carrier
    NS 35
  • Oscillation, broadband noise test result
    Test passed
  • Surface flammability NFPA 130 (ASTM E 162)
    passed
  • Conductor cross section AWG max.
    10
  • Value
    0.75 mm²
  • Permissible humidity (storage/transport)
    30 % ... 70 %
  • ECLASS 4.0
    27141121
  • ECLASS 5.0
    27141120
  • ETIM 3.0
    EC000897
  • ETIM 7.0
    EC000897
  • UNSPSC 13.2
    39121410
  • UNSPSC 18.0
    39121410

Product condition

ORIGINAL PACKAGING

SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging


This item can ship within 24h!

1-year warranty

$12.07

Stock:

329

Select Qty:

$12.07

$12.07 each

By purchasing this item, you agree to the Terms & Conditions

Quotebeam is NOT an authorized distributor of Phoenix Contact

Shipping and Delivery Worldwide

calculate costs and time


Secure Payment Processing

with money back guarantee


1 year warranty

on all parts


Responsive Customer Support

we're here to help!

Need more details?

Feel free to chat with us or check our FAQ

Phoenix Contact Disclaimer:

The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Relevant products

Do you have questions?

We’re here for you ✨

We are a proud member of:

Association for High Technology Distribution LogoAssociation for Advancing Automation LogoThe International Society of Automation Logo