3273632 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  13
• Nominal cross section feed-in
  10 mm²
• Flammability rating according to UL 94
  V0
• Rated surge voltage
  6 kV
• Tight fit on carrier
  NS 35
• Note
  The max. load current must not be exceeded by the total current of all connected conductors.
• Result of aging test
  Test passed
• ASD level
  6.12 (m/s2)2/Hz
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Height NS 35/7,5
  32.4 mm
• Connection method
  Push-in connection
• Conductor cross section solid max.
  6 mm²
• Conductor cross section flexible min.
  0.2 mm²
• Number of levels
  1
• Nominal cross section
  4 mm²
• Insulating material
  PA
• Insulating material group
  I
• Maximum total current
  63 A
• Nominal voltage UN
  800 V
Open side panel
No
Result of power-frequency withstand voltage test
Test passed
Bending test turns
135
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Setpoint
5 N
Proof of thermal characteristics (needle flame) effective duration
30 s
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Potentials
1
Color
orange
Overvoltage category
III
Nominal current IN
32 A
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Finger protection
guaranteed
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Short-time current
1.2 kA
Conductor cross section short circuit testing
10 mm²
ECLASS 4.1
27141121
Maximum load current
63 A
Bending test rotation speed
10 rpm
Result of tight fit on support
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Oscillation, broadband noise test result
Test passed
Test duration per axis
5 h
Number of shocks per direction
3
Static insulating material application in cold
-60 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Height NS 15
30.4 mm
Conductor cross section AWG min.
24
Min. AWG conductor cross section, flexible
24
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Connection cross sections directly pluggable
0.5 mm² 6 mm² 20 10
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141121
ECLASS 5.1
27141120
ETIM 3.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 19.0
39121410
UNSPSC 21.0
39121410
Result of surge voltage test
Test passed
Tensile test result
Test passed
Result of thermal test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Shock form
Half-sine
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
58.1 mm
Stripping length
10 mm ... 12 mm
Connection in acc. with standard
IEC 60998-2-2
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.2 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 10.0.1
27141120
ECLASS 9.0
27141120
ECLASS 7.0
27141120
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410
Back of the hand protection
guaranteed
Power frequency withstand voltage setpoint
2 kV
Short circuit stability result
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock test result
Test passed
Surface flammability NFPA 130 (ASTM E 162)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Conductor cross section AWG max.
10
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.2 mm²
Internal cylindrical gage
A4
Permissible humidity (storage/transport)
30 % ... 70 %
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 11.0
27141120
ECLASS 5.0
27141120
ETIM 4.0
EC000897
ETIM 7.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410
Degree of pollution
3
Result of flexion and pull-out test
Test passed
Result of voltage-drop test
Test passed
Result of temperature-rise test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Acceleration
30g
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock duration
18 ms
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Width
28.6 mm
Connection
Feed-in stage
Conductor cross section solid min.
0.5 mm²
Conductor cross section flexible max.
4 mm²
Max. AWG conductor cross section, flexible
12
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Value
0.75 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 6.0
27141100
ETIM 6.0
EC000897
UNSPSC 11
39121410
UNSPSC 12.01
39121410