3273628 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  13
• Degree of pollution
  3
• Insulating material group
  I
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Result of surge voltage test
  Test passed
• Result of flexion and pull-out test
  Test passed
• Tensile test result
  Test passed
• Conductor cross section short circuit testing
  10 mm²
• Oscillation, broadband noise test result
  Test passed
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Shock duration
  18 ms
• Number of levels
  1
• Color
  black
• Rated surge voltage
  6 kV
• Nominal current IN
  32 A
• Nominal voltage UN
  800 V
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Bending test conductor cross section/weight
  0.5 mm² / 0.3 kg
• Potentials
  1
Nominal cross section feed-in
10 mm²
Overvoltage category
III
Open side panel
No
Result of power-frequency withstand voltage test
Test passed
Bending test rotation speed
10 rpm
Tight fit on carrier
NS 35
Result of temperature-rise test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test spectrum
Service life test category 2, bogie-mounted
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
58.1 mm
Conductor cross section solid min.
0.5 mm²
ETIM 6.0
EC000897
UNSPSC 18.0
39121410
Flammability rating according to UL 94
V0
Maximum load current
63 A
Back of the hand protection
guaranteed
Power frequency withstand voltage setpoint
2 kV
Result of tight fit on support
Test passed
Result of voltage-drop test
Test passed
Short circuit stability result
Test passed
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
Nominal cross section
4 mm²
Insulating material
PA
Maximum total current
63 A
Finger protection
guaranteed
Bending test turns
135
Setpoint
5 N
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Result of aging test
Test passed
UNSPSC 6.01
30211811
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Short-time current
1.2 kA
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Number of shocks per direction
3
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Width
28.6 mm
Height NS 15
30.4 mm
Conductor cross section AWG max.
10
ETIM 4.0
EC000897
ETIM 7.0
EC000897
UNSPSC 20.0
39121410
Test duration per axis
5 h
Shock form
Half-sine
Value
0.75 mm²
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Shock test result
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection in acc. with standard
IEC 60998-2-2
Conductor cross section AWG min.
24
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.0
27141120
Ageing test for screwless modular terminal block temperature cycles
192
ASD level
6.12 (m/s2)2/Hz
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Stripping length
10 mm ... 12 mm
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.2 mm²
Connection cross sections directly pluggable
0.5 mm² 6 mm² 20 10
Result of thermal test
Test passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Height NS 35/7,5
32.4 mm
Max. AWG conductor cross section, flexible
12
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 4.0
27141121
ETIM 3.0
EC000897
Acceleration
30g
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Connection
Feed-in stage
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.2 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.1
27141120
ECLASS 6.0
27141100
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Connection method
Push-in connection
Conductor cross section solid max.
6 mm²
Min. AWG conductor cross section, flexible
24
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Internal cylindrical gage
A4
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 11.0
27141120
ECLASS 9.0
27141120
ECLASS 10.0.1
27141120
ECLASS 4.1
27141121
ECLASS 7.0
27141120