3273616 Phoenix Contact Terminal Blocks

Product Details

• Finger protection
  guaranteed
• Potentials
  1
• Insulating material
  PA
• Flammability rating according to UL 94
  V0
• Maximum total current
  63 A
• Power frequency withstand voltage setpoint
  2 kV
• Bending test turns
  135
• Setpoint
  5 N
• Result of temperature-rise test
  Test passed
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• ASD level
  6.12 (m/s2)2/Hz
• Shock test result
  Test passed
• Number of shocks per direction
  3
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  28 MJ/kg
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Value
  0.75 mm²
• Color
  blue
• Nominal cross section
  4 mm²
• Rated surge voltage
  6 kV
• Tensile test result
  Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Short-time current
1.2 kA
Test spectrum
Service life test category 2, bogie-mounted
Oscillation, broadband noise test result
Test passed
Acceleration
30g
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Degree of pollution
3
Overvoltage category
III
Open side panel
No
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test rotation speed
10 rpm
Result of voltage-drop test
Test passed
Short circuit stability result
Test passed
Test duration per axis
5 h
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Length
58.1 mm
Connection method
Push-in connection
Conductor cross section AWG min.
24
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.2 mm²
Connection cross sections directly pluggable
0.5 mm² 6 mm² 20 10
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.0
27141120
ECLASS 4.1
27141121
ECLASS 9.0
27141120
UNSPSC 6.01
30211811
UNSPSC 20.0
39121410
UNSPSC 21.0
39121410
Nominal voltage UN
800 V
Result of surge voltage test
Test passed
Result of flexion and pull-out test
Test passed
Tight fit on carrier
NS 35
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Result of thermal test
Test passed
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Stripping length
10 mm ... 12 mm
Conductor cross section solid min.
0.5 mm²
Conductor cross section AWG max.
10
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.2 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 10.0.1
27141120
ECLASS 4.0
27141121
ETIM 6.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 12.01
39121410
Number of connections
13
Insulating material group
I
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of power-frequency withstand voltage test
Test passed
Conductor cross section short circuit testing
10 mm²
Result of aging test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
18 ms
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Width
28.6 mm
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection in acc. with standard
IEC 60998-2-2
Max. AWG conductor cross section, flexible
12
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Internal cylindrical gage
A4
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 11.0
27141120
ECLASS 7.0
27141120
ETIM 4.0
EC000897
ETIM 7.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 18.0
39121410
Number of levels
1
Nominal cross section feed-in
10 mm²
Maximum load current
63 A
Nominal current IN
32 A
Back of the hand protection
guaranteed
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Result of tight fit on support
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock form
Half-sine
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Connection
Feed-in stage
Conductor cross section solid max.
6 mm²
Min. AWG conductor cross section, flexible
24
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.1
27141120
ECLASS 6.0
27141100
ETIM 3.0
EC000897
UNSPSC 11
39121410
UNSPSC 19.0
39121410
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Height NS 35/7,5
32.4 mm
Height NS 15
30.4 mm
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²