3273352 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  13
• Rated surge voltage
  6 kV
• Maximum power dissipation for nominal condition
  1.31 W (the value is based on one connection block and is multiplied according to the pin assignment)
• Back of the hand protection
  guaranteed
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Number of shocks per direction
  3
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  130 °C
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Length
  28.6 mm
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Connection in acc. with standard
  IEC 60998-2-2
• Conductor cross section AWG min.
  20
• Min. AWG conductor cross section, flexible
  20
• Conductor cross section flexible, with ferrule with plastic sleeve min.
  0.5 mm²
• Connection
  Feed-in stage
• Value
  1 mm²
• Ambient temperature (storage/transport)
  -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
• Ambient temperature (assembly)
  -5 °C ... 70 °C
• ECLASS 4.1
  27141121
• ECLASS 5.1
  27141120
ETIM 4.0
EC000897
UNSPSC 18.0
39121410
UNSPSC 20.0
39121410
Note
Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
Nominal cross section
2.5 mm²
Flammability rating according to UL 94
V0
Overvoltage category
III
Maximum total current
57 A (with 10 mm² conductor cross section)
Open side panel
No
Finger protection
guaranteed
Test spectrum
Service life test category 2, bogie-mounted
Oscillation, broadband noise test result
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Surface flammability NFPA 130 (ASTM E 162)
passed
Static insulating material application in cold
-60 °C
Height
21.7 mm
Conductor cross section solid max.
10 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Max. AWG conductor cross section, flexible
10
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Color
gray
Degree of pollution
3
Maximum load current
57 A (with 10 mm² conductor cross section)
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Proof of thermal characteristics (needle flame) effective duration
30 s
Test duration per axis
5 h
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock duration
18 ms
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Number of levels
1
Nominal cross section feed-in
6 mm²
Insulating material group
I
Nominal voltage UN
450 V
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Acceleration
30g
Shock form
Half-sine
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Stripping length
10 mm ... 12 mm
Conductor cross section solid min.
1 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Internal cylindrical gage
A3
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 6.0
27141100
ETIM 7.0
EC000897
Potentials
1
Insulating material
PA
Nominal current IN
41 A (with 6 mm² conductor cross section)
Result of thermal test
Test passed
ASD level
6.12 (m/s2)2/Hz
Shock test result
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
41 mm
Connection method
Push-in connection
Conductor cross section flexible max.
10 mm²
Conductor cross section flexible min.
0.5 mm²
Conductor cross section AWG max.
8
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Connection cross sections directly pluggable
1 mm² 10 mm²
ECLASS 4.0
27141121
ECLASS 7.0
27141120
ETIM 6.0
EC000897
ECLASS 11.0
27141120
ETIM 3.0
EC000897
UNSPSC 13.2
39121410
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 10.0.1
27141120
ECLASS 5.0
27141120
UNSPSC 6.01
30211811
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
ECLASS 9.0
27141120
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
UNSPSC 19.0
39121410