3273338 Phoenix Contact Terminal Blocks
Part#:3273338
Manufacturer:Phoenix Contact
Product Lifecycle:Active
In-stock parts: 342
Nov 25, 2024
Distribution block, Basic terminal block with supply, The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories, nom. voltage: 450 V, nominal current: 24 A, connection method: Push-in connection
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Terminal Blocks that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 3273338 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Color green
- ECLASS 6.0 27141100
- Insulating material group I
- Number of levels 1
- Nominal cross section 2.5 mm²
- Degree of pollution 3
- Maximum load current 57 A (with 10 mm² conductor cross section)
- Open side panel No
- Oscillation, broadband noise test result Test passed
- Test duration per axis 5 h
- Shock form Half-sine
- Static insulating material application in cold -60 °C
- Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg
- Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3
- Connection method Push-in connection
- Conductor cross section AWG max. 8
- Conductor cross section flexible max. 10 mm²
- Conductor cross section flexible, with ferrule without plastic sleeve min. 0.5 mm²
- Conductor cross section flexible, with ferrule without plastic sleeve max. 6 mm²
- Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum 0.5 mm²
- Ambient temperature (assembly) -5 °C ... 70 °C
- ECLASS 10.0.1 27141120
- Potentials 1
- Nominal current IN 41 A (with 6 mm² conductor cross section)
- Finger protection guaranteed
- ASD level 6.12 (m/s2)2/Hz
- Test directions X-, Y- and Z-axis (pos. and neg.)
- Shock duration 18 ms
- Relative insulation material temperature index (Elec., UL 746 B) 130 °C
- Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3
- Height 21.7 mm
- Connection in acc. with standard IEC 60998-2-2
- Conductor cross section flexible min. 0.5 mm²
- Min. AWG conductor cross section, flexible 20
- Conductor cross section flexible, with ferrule with plastic sleeve max. 6 mm²
- Connection Feed-in stage
- Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum 1.5 mm²
- Ambient temperature (actuation) -5 °C ... 70 °C
- ECLASS 9.0 27141120
- ECLASS 7.0 27141120
- ETIM 7.0 EC000897
- Note Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories
- Flammability rating according to UL 94 V0
- Nominal voltage UN 450 V
- Proof of thermal characteristics (needle flame) effective duration 30 s
- Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03
- Acceleration 30g
- Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03
- Specific optical density of smoke NFPA 130 (ASTM E 662) passed
- Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3
- Length 28.6 mm
- Stripping length 10 mm ... 12 mm
- Conductor cross section solid min. 1 mm²
- Max. AWG conductor cross section, flexible 10
- Internal cylindrical gage A3
- Value 1 mm²
- Ambient temperature (storage/transport) -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
- China RoHS Environmentally friendly use period: unlimited = EFUP-e
- ECLASS 5.0 27141120
- UNSPSC 6.01 30211811
- UNSPSC 18.0 39121410
- Nominal cross section feed-in 6 mm²
- Overvoltage category III
- Maximum power dissipation for nominal condition 1.31 W (the value is based on one connection block and is multiplied according to the pin assignment)
- Back of the hand protection guaranteed
- Test frequency f1 = 5 Hz to f2 = 250 Hz
- Shock test result Test passed
- Number of shocks per direction 3
- Surface flammability NFPA 130 (ASTM E 162) passed
- Smoke gas toxicity NFPA 130 (SMP 800C) passed
- Width 25.6 mm
- Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3
- Conductor cross section solid max. 10 mm²
- Conductor cross section AWG min. 20
- Conductor cross section flexible, with ferrule with plastic sleeve min. 0.5 mm²
- Connection cross sections directly pluggable 1 mm² 10 mm²
- Operating temperature -60 °C ... 105 °C (max. short-term operating temperature 130°C)
- Permissible humidity (storage/transport) 30 % ... 70 %
- ECLASS 4.0 27141121
- ECLASS 5.1 27141120
- ETIM 4.0 EC000897
- UNSPSC 12.01 39121410
- UNSPSC 19.0 39121410
- Number of connections 7
- Insulating material PA
- Rated surge voltage 6 kV
- Maximum total current 57 A (with 10 mm² conductor cross section)
- Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11
- Result of thermal test Test passed
- Test spectrum Service life test category 2, bogie-mounted
- Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
- ECLASS 11.0 27141120
- ECLASS 4.1 27141121
- ETIM 3.0 EC000897
- UNSPSC 11 39121410
- UNSPSC 13.2 39121410
- UNSPSC 21.0 39121410
- ETIM 6.0 EC000897
- UNSPSC 7.0901 39121410
- UNSPSC 20.0 39121410
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
This item can ship within 24h!
1-year warranty
$3.33
Stock:
342
Select Qty:
$3.33
$3.33 each
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
