3273256 Phoenix Contact Terminal Blocks

Product Details

• ECLASS 6.0
  27141100
• ETIM 7.0
  EC000897
• UNSPSC 13.2
  39121410
• Number of connections
  19
• Nominal cross section feed-in
  6 mm²
• Color
  black
• Maximum load current
  57 A (with 10 mm² conductor cross section)
• Maximum total current
  57 A (with 10 mm² conductor cross section)
• Back of the hand protection
  guaranteed
• Result of flexion and pull-out test
  Test passed
• Power frequency withstand voltage setpoint
  1.89 kV
• Bending test turns
  135
• Result of temperature-rise test
  Test passed
• Short-time current
  1.2 kA
• Degree of pollution
  3
• Nominal current IN
  41 A (with 6 mm² conductor cross section)
• Insulating material group
  I
• Finger protection
  guaranteed
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Tensile test result
  Test passed
Result of tight fit on support
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Ageing test for screwless modular terminal block temperature cycles
192
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Number of shocks per direction
3
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
ECLASS 4.0
27141121
Potentials
1
Rated surge voltage
8 kV
Open side panel
No
Result of surge voltage test
Test passed
Bending test rotation speed
10 rpm
Setpoint
5 N
Short circuit stability result
Test passed
Conductor cross section short circuit testing
10 mm²
Oscillation, broadband noise test result
Test passed
Test duration per axis
5 h
Acceleration
30g
Shock test result
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Width
56.5 mm
Conductor cross section solid max.
10 mm²
Connection in acc. with standard
IEC 60947-7-1
Min. AWG conductor cross section, flexible
20
Conductor cross section flexible max.
10 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1.5 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Ambient temperature (assembly)
-5 °C ... 70 °C
Nominal cross section
2.5 mm²
Insulating material
PA
Flammability rating according to UL 94
V0
Maximum power dissipation for nominal condition
1.31 W (the value is based on one connection block and is multiplied according to the pin assignment)
Connection
Feed-in stage
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 11.0
27141120
ECLASS 7.0
27141120
ETIM 4.0
EC000897
UNSPSC 12.01
39121410
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Number of levels
1
Overvoltage category
III
Nominal voltage UN
690 V
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of power-frequency withstand voltage test
Test passed
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Tight fit on carrier
NS 35
Result of voltage-drop test
Test passed
Result of aging test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test spectrum
Service life test category 2, bogie-mounted
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Stripping length
10 mm ... 12 mm
Conductor cross section flexible min.
0.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Length
45.7 mm
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
ETIM 3.0
EC000897
UNSPSC 18.0
39121410
Result of thermal test
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock form
Half-sine
Height NS 35/7,5
30.9 mm
Max. AWG conductor cross section, flexible
10
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Value
1 mm²
ECLASS 10.0.1
27141120
ECLASS 5.1
27141120
ETIM 6.0
EC000897
UNSPSC 21.0
39121410
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock duration
18 ms
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection method
Push-in connection
Conductor cross section solid min.
1 mm²
Connection cross sections directly pluggable
1 mm² 10 mm²
Internal cylindrical gage
A3
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.1
27141121
ECLASS 9.0
27141120
ASD level
6.12 (m/s2)2/Hz
Surface flammability NFPA 130 (ASTM E 162)
passed
Conductor cross section AWG min.
20
Conductor cross section AWG max.
8
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.0
27141120
UNSPSC 6.01
30211811
UNSPSC 19.0
39121410
UNSPSC 20.0
39121410