3273154 Phoenix Contact Terminal Blocks

Product Details

• Note
  The max. load current must not be exceeded by the total current of all connected conductors.
• Rated surge voltage
  8 kV
• Overvoltage category
  III
• Nominal current IN
  24 A
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Tensile test result
  Test passed
• Setpoint
  1 N
• Conductor cross section short circuit testing
  4 mm²
• Test spectrum
  Service life test category 2, bogie-mounted
• Test duration per axis
  5 h
• Shock test result
  Test passed
• Relative insulation material temperature index (Elec., UL 746 B)
  130 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Length
  45.7 mm
• Conductor cross section solid max.
  4 mm²
• Conductor cross section flexible max.
  2.5 mm²
• Connection cross sections directly pluggable
  0.34 mm² 4 mm² 24 12
• Ambient temperature (assembly)
  -5 °C ... 70 °C
• ECLASS 11.0
  27141120
ECLASS 6.0
27141100
UNSPSC 6.01
30211811
Number of connections
12
Degree of pollution
3
Insulating material
PA
Number of levels
1
Flammability rating according to UL 94
V0
Maximum power dissipation for nominal condition
0.77 W (the value is based on one connection block and is multiplied according to the pin assignment)
Potentials
1
Color
gray
Insulating material group
I
Open side panel
No
Finger protection
guaranteed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Result of temperature-rise test
Test passed
Result of voltage-drop test
Test passed
Result of thermal test
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Width
31.5 mm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section solid min.
0.34 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.0
27141120
ETIM 7.0
EC000897
ETIM 6.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410
Nominal cross section
2.5 mm²
Maximum total current
48 A
Back of the hand protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Result of flexion and pull-out test
Test passed
Bending test rotation speed
10 rpm
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Oscillation, broadband noise test result
Test passed
ASD level
6.12 (m/s2)2/Hz
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Surface flammability NFPA 130 (ASTM E 162)
passed
Connection method
Push-in connection
Conductor cross section AWG min.
26
Min. AWG conductor cross section, flexible
26
Max. AWG conductor cross section, flexible
14
ECLASS 10.0.1
27141120
ECLASS 4.0
27141121
ECLASS 9.0
27141120
ETIM 3.0
EC000897
UNSPSC 11
39121410
Bending test turns
135
Result of tight fit on support
Test passed
Short-time current
0.48 kA
Test directions
X-, Y- and Z-axis (pos. and neg.)
Acceleration
30g
Shock duration
18 ms
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 35/7,5
30.9 mm
Stripping length
8 mm ... 10 mm
Conductor cross section AWG max.
12
Internal cylindrical gage
A3
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 4.1
27141121
ECLASS 5.1
27141120
ETIM 4.0
EC000897
UNSPSC 12.01
39121410
Tight fit on carrier
NS 35
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of aging test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Shock form
Half-sine
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 7.0
27141120
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410
UNSPSC 21.0
39121410
Nominal voltage UN
690 V
Result of surge voltage test
Test passed
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Maximum load current
32 A
Power frequency withstand voltage setpoint
1.89 kV
UNSPSC 19.0
39121410
Ageing test for screwless modular terminal block temperature cycles
192
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11