3273140 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  1
• Color
  green
• Insulating material group
  I
• Maximum total current
  48 A
• Open side panel
  No
• Bending test rotation speed
  10 rpm
• Tensile test result
  Test passed
• Result of temperature-rise test
  Test passed
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Shock test result
  Test passed
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  130 °C
• Calorimetric heat release NFPA 130 (ASTM E 1354)
  28 MJ/kg
• Nominal cross section
  2.5 mm²
• Degree of pollution
  3
• Nominal voltage UN
  690 V
• Result of surge voltage test
  Test passed
• Result of flexion and pull-out test
  Test passed
• Bending test turns
  135
• Result of voltage-drop test
  Test passed
Result of aging test
Test passed
Acceleration
30g
ASD level
6.12 (m/s2)2/Hz
Shock duration
18 ms
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Height NS 35/7,5
30.9 mm
Length
45.7 mm
Conductor cross section AWG max.
12
Conductor cross section AWG min.
26
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
Potentials
1
Flammability rating according to UL 94
V0
Overvoltage category
III
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Back of the hand protection
guaranteed
Power frequency withstand voltage setpoint
1.89 kV
Result of tight fit on support
Test passed
Setpoint
1 N
Short-time current
0.48 kA
Oscillation, broadband noise test result
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock form
Half-sine
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Width
16 mm
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Rated surge voltage
8 kV
Maximum load current
32 A
Finger protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tight fit on carrier
NS 35
Result of thermal test
Test passed
Short circuit stability result
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Test spectrum
Service life test category 2, bogie-mounted
Static insulating material application in cold
-60 °C
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Connection in acc. with standard
IEC 60947-7-1
Internal cylindrical gage
A3
Number of connections
6
Insulating material
PA
Maximum power dissipation for nominal condition
0.77 W (the value is based on one connection block and is multiplied according to the pin assignment)
Nominal current IN
24 A
Result of power-frequency withstand voltage test
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Conductor cross section short circuit testing
4 mm²
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test duration per axis
5 h
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Conductor cross section solid min.
0.34 mm²
Connection method
Push-in connection
Min. AWG conductor cross section, flexible
26
Connection cross sections directly pluggable
0.34 mm² 4 mm² 24 12
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 10.0.1
27141120
ECLASS 7.0
27141120
ETIM 3.0
EC000897
ETIM 7.0
EC000897
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
ECLASS 5.1
27141120
ETIM 6.0
EC000897
UNSPSC 11
39121410
UNSPSC 18.0
39121410
Conductor cross section flexible min.
0.14 mm²
Max. AWG conductor cross section, flexible
14
Ambient temperature (assembly)
-5 °C ... 70 °C
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 9.0
27141120
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410
Stripping length
8 mm ... 10 mm
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 11.0
27141120
ECLASS 5.0
27141120
ETIM 4.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 19.0
39121410
Conductor cross section flexible max.
2.5 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.1
27141121
ECLASS 6.0
27141100
UNSPSC 21.0
39121410
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section solid max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
ECLASS 4.0
27141121
UNSPSC 7.0901
39121410
UNSPSC 12.01
39121410