3273132 Phoenix Contact Terminal Blocks

Product Details

• Potentials
  1
• Degree of pollution
  3
• Maximum load current
  32 A
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Result of power-frequency withstand voltage test
  Test passed
• Bending test conductor cross section/weight
  0.14 mm² / 0.2 kg
• Nominal cross section
  2.5 mm²
• Flammability rating according to UL 94
  V0
• Maximum power dissipation for nominal condition
  0.77 W (the value is based on one connection block and is multiplied according to the pin assignment)
• Open side panel
  No
• Power frequency withstand voltage setpoint
  1.89 kV
• Bending test turns
  135
• Tractive force setpoint
  60 N
• Setpoint
  1 N
• Conductor cross section short circuit testing
  4 mm²
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Shock test result
  Test passed
• Shock form
  Half-sine
• Number of connections
  6
• Insulating material
  PA
Maximum total current
48 A
Nominal voltage UN
690 V
Result of surge voltage test
Test passed
Bending test rotation speed
10 rpm
Result of tight fit on support
Test passed
Requirements, voltage drop
U1 ≤ 3.2 mV; U2 ≤ 1.5 x U1
Result of thermal test
Test passed
Oscillation, broadband noise test result
Test passed
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Length
45.7 mm
Conductor cross section solid max.
4 mm²
Min. AWG conductor cross section, flexible
26
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.1
27141121
ECLASS 7.0
27141120
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410
UNSPSC 19.0
39121410
Number of levels
1
Insulating material group
I
Nominal current IN
24 A
Back of the hand protection
guaranteed
Tensile test result
Test passed
Result of voltage-drop test
Test passed
Result of temperature-rise test
Test passed
Result of aging test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Acceleration
30g
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
16 mm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.1
27141120
ETIM 7.0
EC000897
UNSPSC 13.2
39121410
Note
When aligning several blocks, it is recommended to either place a DIN rail adapter underneath the connection point or a flange element between the blocks.
Color
gray
Rated surge voltage
8 kV
Overvoltage category
III
Finger protection
guaranteed
Result of flexion and pull-out test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Conductor cross section tensile test
4 mm²
Short circuit stability result
Test passed
Short-time current
0.48 kA
Ageing test for screwless modular terminal block temperature cycles
192
ASD level
6.12 (m/s2)2/Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 35/7,5
30.9 mm
Conductor cross section solid min.
0.34 mm²
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Conductor cross section flexible max.
2.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.0
27141121
ETIM 4.0
EC000897
UNSPSC 12.01
39121410
Tight fit on carrier
NS 35
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Proof of thermal characteristics (needle flame) effective duration
30 s
Test spectrum
Service life test category 2, bogie-mounted
Test duration per axis
5 h
Shock duration
18 ms
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Stripping length
8 mm ... 10 mm
Conductor cross section AWG max.
12
Max. AWG conductor cross section, flexible
14
Connection cross sections directly pluggable
0.34 mm² 4 mm² 24 12
Internal cylindrical gage
A3
ECLASS 11.0
27141120
ECLASS 5.0
27141120
ETIM 6.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 21.0
39121410
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Connection method
Push-in connection
Conductor cross section AWG min.
26
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 10.0.1
27141120
ECLASS 9.0
27141120
ECLASS 6.0
27141100
ETIM 3.0
EC000897
UNSPSC 11
39121410
UNSPSC 20.0
39121410