3273052 Phoenix Contact Terminal Blocks

Product Details

• Potentials
  1
• Insulating material
  PA
• Number of levels
  1
• Insulating material group
  I
• Flammability rating according to UL 94
  V0
• Ageing test for screwless modular terminal block temperature cycles
  192
• Result of thermal test
  Test passed
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Shock form
  Half-sine
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Acceleration
  30g
• Static insulating material application in cold
  -60 °C
• Smoke gas toxicity NFPA 130 (SMP 800C)
  passed
• Width
  28.6 mm
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Conductor cross section solid min.
  0.34 mm²
• Ambient temperature (actuation)
  -5 °C ... 70 °C
Tight fit on carrier
NS 35
Short circuit stability result
Test passed
Result of aging test
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test duration per axis
5 h
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Result of voltage-drop test
Test passed
Short-time current
0.48 kA
Oscillation, broadband noise test result
Test passed
ASD level
6.12 (m/s2)2/Hz
Shock duration
18 ms
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
ECLASS 9.0
27141120
Result of temperature-rise test
Test passed
Conductor cross section short circuit testing
4 mm²
Proof of thermal characteristics (needle flame) effective duration
30 s
Test spectrum
Service life test category 2, bogie-mounted
Shock test result
Test passed
Number of connections
18
Maximum load current
32 A
Nominal voltage UN
690 V
Result of surge voltage test
Test passed
Bending test turns
135
Result of tight fit on support
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Length
58.1 mm
Conductor cross section flexible min.
0.14 mm²
Conductor cross section AWG min.
26
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Nominal cross section
2.5 mm²
Overvoltage category
III
Maximum power dissipation for nominal condition
0.77 W (the value is based on one connection block and is multiplied according to the pin assignment)
Result of flexion and pull-out test
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Rated surge voltage
8 kV
Maximum total current
48 A
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Finger protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Setpoint
1 N
Height NS 35/7,5
32.4 mm
Stripping length
8 mm ... 10 mm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section flexible max.
2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Connection cross sections directly pluggable
0.34 mm² 4 mm² 24 12
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 11.0
27141120
ECLASS 10.0.1
27141120
ETIM 4.0
EC000897
ETIM 6.0
EC000897
UNSPSC 11
39121410
Color
green
Nominal current IN
24 A
Back of the hand protection
guaranteed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test rotation speed
10 rpm
Number of shocks per direction
3
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Height NS 15
30.4 mm
Max. AWG conductor cross section, flexible
14
Min. AWG conductor cross section, flexible
26
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141121
ECLASS 5.1
27141120
ETIM 3.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410
Degree of pollution
3
Open side panel
No
Power frequency withstand voltage setpoint
1.89 kV
Tensile test result
Test passed
Connection method
Push-in connection
Conductor cross section solid max.
4 mm²
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
ECLASS 4.1
27141121
ECLASS 5.0
27141120
ETIM 7.0
EC000897
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410
Internal cylindrical gage
A3
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 6.0
27141100
ECLASS 7.0
27141120
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410
UNSPSC 21.0
39121410