3273008 Phoenix Contact Terminal Blocks

Product Details

• Note
  The max. load current must not be exceeded by the total current of all connected conductors.
• Color
  green
• Flammability rating according to UL 94
  V0
• Maximum power dissipation for nominal condition
  0.77 W (the value is based on one connection block and is multiplied according to the pin assignment)
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Result of surge voltage test
  Test passed
• Power frequency withstand voltage setpoint
  1.89 kV
• Bending test conductor cross section/weight
  0.14 mm² / 0.2 kg
• Tensile test result
  Test passed
• Result of thermal test
  Test passed
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R24
  HL 1 - HL 3
• Length
  58.1 mm
• Stripping length
  8 mm ... 10 mm
• Conductor cross section AWG max.
  12
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  0.34 mm²
• Internal cylindrical gage
  A3
• Permissible humidity (storage/transport)
  30 % ... 70 %
ECLASS 4.1
27141121
ETIM 6.0
EC000897
UNSPSC 12.01
39121410
Nominal cross section
2.5 mm²
Insulating material group
I
Nominal current IN
24 A
Nominal voltage UN
690 V
Finger protection
guaranteed
Result of flexion and pull-out test
Test passed
Result of temperature-rise test
Test passed
Result of aging test
Test passed
ASD level
6.12 (m/s2)2/Hz
Shock test result
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Conductor cross section solid min.
0.34 mm²
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.0
27141120
ECLASS 9.0
27141120
UNSPSC 6.01
30211811
UNSPSC 21.0
39121410
Potentials
1
Overvoltage category
III
Degree of pollution
3
Open side panel
No
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test turns
135
Setpoint
1 N
Conductor cross section short circuit testing
4 mm²
Proof of thermal characteristics (needle flame) effective duration
30 s
Test duration per axis
5 h
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Height NS 35/7,5
32.4 mm
Height NS 15
30.4 mm
Conductor cross section solid max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Ambient temperature (actuation)
-5 °C ... 70 °C
ETIM 3.0
EC000897
ETIM 4.0
EC000897
UNSPSC 11
39121410
Number of connections
6
Insulating material
PA
Maximum load current
32 A
Back of the hand protection
guaranteed
Bending test rotation speed
10 rpm
Ageing test for screwless modular terminal block temperature cycles
192
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test spectrum
Service life test category 2, bogie-mounted
Shock form
Half-sine
Shock duration
18 ms
Static insulating material application in cold
-60 °C
Number of levels
1
Rated surge voltage
8 kV
Maximum total current
48 A
Result of power-frequency withstand voltage test
Test passed
Short-time current
0.48 kA
Oscillation, broadband noise test result
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Acceleration
30g
Number of shocks per direction
3
Result of tight fit on support
Test passed
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Connection cross sections directly pluggable
0.34 mm² 4 mm² 24 12
ECLASS 5.1
27141120
ETIM 7.0
EC000897
UNSPSC 18.0
39121410
Short circuit stability result
Test passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Connection method
Push-in connection
Min. AWG conductor cross section, flexible
26
ECLASS 10.0.1
27141120
ECLASS 6.0
27141100
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410
Result of voltage-drop test
Test passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Width
28.6 mm
Conductor cross section AWG min.
26
Conductor cross section flexible max.
2.5 mm²
Max. AWG conductor cross section, flexible
14
ECLASS 4.0
27141121
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410
ECLASS 11.0
27141120
ECLASS 7.0
27141120
Tight fit on carrier
NS 35