3273000 Phoenix Contact Terminal Blocks

Product Details

• Potentials
  1
• Flammability rating according to UL 94
  V0
• Insulating material group
  I
• Open side panel
  No
• Result of surge voltage test
  Test passed
• Bending test conductor cross section/weight
  0.14 mm² / 0.2 kg
• Setpoint
  1 N
• Short circuit stability result
  Test passed
• Result of aging test
  Test passed
• Test spectrum
  Service life test category 2, bogie-mounted
• Shock form
  Half-sine
• Note
  The max. load current must not be exceeded by the total current of all connected conductors.
• Color
  gray
• Nominal current IN
  24 A
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Result of flexion and pull-out test
  Test passed
• Bending test turns
  135
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Oscillation, broadband noise test result
  Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Static insulating material application in cold
-60 °C
Width
28.6 mm
UNSPSC 20.0
39121410
UNSPSC 18.0
39121410
UNSPSC 11
39121410
UNSPSC 13.2
39121410
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410
UNSPSC 21.0
39121410
Nominal cross section
2.5 mm²
Maximum load current
32 A
Result of tight fit on support
Test passed
Result of temperature-rise test
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Length
58.1 mm
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section AWG min.
26
Min. AWG conductor cross section, flexible
26
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.1
27141120
ECLASS 6.0
27141100
ETIM 7.0
EC000897
Rated surge voltage
8 kV
Overvoltage category
III
Back of the hand protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Number of levels
1
Degree of pollution
3
Maximum total current
48 A
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Tensile test result
Test passed
Short-time current
0.48 kA
Acceleration
30g
Shock duration
18 ms
Shock test result
Test passed
Number of connections
6
Insulating material
PA
Maximum power dissipation for nominal condition
0.77 W (the value is based on one connection block and is multiplied according to the pin assignment)
Power frequency withstand voltage setpoint
1.89 kV
Tight fit on carrier
NS 35
Conductor cross section short circuit testing
4 mm²
ASD level
6.12 (m/s2)2/Hz
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 35/7,5
32.4 mm
Conductor cross section solid min.
0.34 mm²
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Connection cross sections directly pluggable
0.34 mm² 4 mm² 24 12
ECLASS 10.0.1
27141120
ECLASS 4.1
27141121
ETIM 3.0
EC000897
UNSPSC 6.01
30211811
Nominal voltage UN
690 V
Finger protection
guaranteed
Bending test rotation speed
10 rpm
Result of voltage-drop test
Test passed
Result of thermal test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test duration per axis
5 h
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Stripping length
8 mm ... 10 mm
Conductor cross section solid max.
4 mm²
Max. AWG conductor cross section, flexible
14
Internal cylindrical gage
A3
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 4.0
27141121
ECLASS 9.0
27141120
ETIM 6.0
EC000897
Number of shocks per direction
3
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 15
30.4 mm
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 5.0
27141120
ETIM 4.0
EC000897
UNSPSC 12.01
39121410
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Connection method
Push-in connection
Conductor cross section flexible max.
2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.34 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141120
ECLASS 7.0
27141120