3211991 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  4
• Color
  gray
• Potentials
  1
• Overvoltage category
  III
• Nominal voltage UN
  800 V
• Result of surge voltage test
  Test passed
• Bending test turns
  135
• Setpoint
  1 N
• Proof of thermal characteristics (needle flame) effective duration
  30 s
• Shock test result
  Test passed
• Number of shocks per direction
  3
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• Width
  6.2 mm
• Length
  92.1 mm
• Connection in acc. with standard
  IEC 60947-7-1
• Conductor cross section AWG max.
  10
• Conductor cross section flexible, with ferrule with plastic sleeve max.
  4 mm²
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
  0.5 mm²
• Ambient temperature (assembly)
  -5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 6.0
27141100
ETIM 4.0
EC000897
Nominal cross section
4 mm²
Rated surge voltage
8 kV
Maximum power dissipation for nominal condition
1.02 W
Power frequency withstand voltage setpoint
2 kV
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Short circuit stability result
Test passed
Oscillation, broadband noise test result
Test passed
Acceleration
5g
Test duration per axis
5 h
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
End cover width
2.2 mm
Number of levels
1
Flammability rating according to UL 94
V0
Degree of pollution
3
Nominal current IN
32 A
Result of tight fit on support
Test passed
Result of thermal test
Test passed
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Shock form
Half-sine
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Stripping length
10 mm ... 12 mm
Conductor cross section AWG min.
24
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Internal cylindrical gage
A4
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 10.0.1
27141120
ECLASS 9.0
27141120
Insulating material
PA
Insulating material group
I
Maximum load current
32 A (with 6 mm² conductor cross section, rigid)
Result of power-frequency withstand voltage test
Test passed
Result of flexion and pull-out test
Test passed
Conductor cross section short circuit testing
1.5 mm²
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
ASD level
0.964 (m/s2)2/Hz
Shock duration
30 ms
Static insulating material application in cold
-60 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection method
Push-in / plug connection
Max. AWG conductor cross section, flexible
12
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 5.1
27141100
ETIM 6.0
EC000897
UNSPSC 11
39121410
Open side panel
Yes
Bending test rotation speed
10 rpm
Tensile test result
Test passed
Tight fit on carrier
NS 35
Short-time current
0.18 kA
Test spectrum
Service life test category 1, class B, body mounted
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2018-05
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Height NS 35/7,5
36.5 mm
Connection
1 level
Conductor cross section solid max.
6 mm²
Conductor cross section flexible max.
6 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
Operating temperature
-60 °C (maximum operating temperature see derating curve)
ECLASS 5.0
27141100
ECLASS 7.0
27141120
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410
Height NS 35/15
44 mm
Conductor cross section solid min.
0.5 mm²
Conductor cross section flexible min.
0.2 mm²
Min. AWG conductor cross section, flexible
24
Connection cross sections directly pluggable
0.5 mm² 6 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 11.0
27141120
ECLASS 4.1
27141100
ETIM 7.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 21.0
39121410
UNSPSC 6.01
30211811
UNSPSC 12.01
39121410
UNSPSC 18.0
39121410
UNSPSC 19.0
39121410