3211757 Phoenix Contact Terminal Blocks

3211757 Product Details

• Connection in acc. with standard
  CSA
• Conductor cross section flexible max.
  6 mm²
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
  1 mm²
• Bending test conductor cross section/weight
  0.2 mm² / 0.2 kg
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Ambient temperature (actuation)
  -5 °C ... 70 °C
• Power frequency withstand voltage setpoint
  2 kV
• ECLASS 4.1
  27141100
• ETIM 3.0
  EC000897
• UNSPSC 19.0
  39121410
• UNSPSC 21.0
  39121410
• UNSPSC 20.0
  39121410
• Operating temperature
  -60 °C ... 105 °C (max. short-term operating temperature 130°C)
• Height NS 35/7,5
  36.5 mm
• ECLASS 10.0.1
  27141120
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  0.5 mm²
• ETIM 6.0
  EC000897
• UNSPSC 11
  39121410
• ECLASS 11.0
  27141120
• ECLASS 6.0
  27141100
ECLASS 9.0
27141120
UNSPSC 12.01
39121410
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ETIM 4.0
EC000897
UNSPSC 6.01
30211811
ECLASS 5.1
27141100
ETIM 7.0
EC000897
UNSPSC 18.0
39121410
UNSPSC 7.0901
39121410
UNSPSC 13.2
39121410
Number of levels
1
Color
gray
Insulating material
PA
Potentials
1
Nominal cross section
4 mm²
Open side panel
Yes
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test directions
X-, Y- and Z-axis (pos. and neg.)
Ageing test for screwless modular terminal block temperature cycles
192
ASD level
6.12 (m/s2)2/Hz
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Width
6.2 mm
Height
35.3 mm
Connection method
Push-in connection
Conductor cross section AWG max.
10
Max. AWG conductor cross section, flexible
12
Connection cross sections directly pluggable
0.5 mm² 6 mm²
ECLASS 4.0
27141100
Result of temperature-rise test
Test passed
Conductor cross section short circuit testing
6 mm²
Proof of thermal characteristics (needle flame) effective duration
30 s
Permissible humidity (storage/transport)
30 % ... 70 %
Short circuit stability result
Test passed
Oscillation, broadband noise test result
Test passed
Test duration per axis
5 h
Shock duration
18 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
56 mm
Conductor cross section AWG min.
24
Min. AWG conductor cross section, flexible
24
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Number of connections
2
Area of application
Railway industry
Overvoltage category
III
Maximum load current
36 A (with 6 mm² conductor cross section, rigid)
Nominal voltage UN
800 V
Nominal current IN
32 A
Result of surge voltage test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test rotation speed
10 rpm
Result of tight fit on support
Test passed
Result of voltage-drop test
Test passed
Result of thermal test
Test passed
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Acceleration
30g
Shock form
Half-sine
Static insulating material application in cold
-60 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Tight fit on carrier
NS 35
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of aging test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Shock test result
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
End cover width
2.2 mm
Stripping length
10 mm ... 12 mm
Height NS 35/15
44 mm
Conductor cross section solid max.
6 mm²
Conductor cross section solid min.
0.5 mm²
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Internal cylindrical gage
A4
Number of shocks per direction
3
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Connection
1 level
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 5.0
27141100
ECLASS 7.0
27141120
ETIM 2.0
EC000897
Rated surge voltage
8 kV
Bending test turns
135
Flammability rating according to UL 94
V0
Back of the hand protection
guaranteed
Setpoint
1 N
Short-time current
0.72 kA
Insulating material group
I
Result of power-frequency withstand voltage test
Test passed
Result of flexion and pull-out test
Test passed
Tensile test result
Test passed
Maximum power dissipation for nominal condition
1.02 W
Finger protection
guaranteed
Degree of pollution
3
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11

Product condition