3211929 Phoenix Contact Terminal Blocks

Product Details

• ETIM 6.0
  EC000897
• UNSPSC 6.01
  30211811
• ECLASS 6.0
  27141100
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Result of power-frequency withstand voltage test
  Test passed
• Bending test rotation speed
  10 rpm
• Height NS 35/7,5
  43.5 mm
• Conductor cross section AWG min.
  20
• Min. AWG conductor cross section, flexible
  20
• Max. AWG conductor cross section, flexible
  10
• Ambient temperature (assembly)
  -5 °C ... 70 °C
• Number of levels
  1
• Insulating material
  PA
• Overvoltage category
  III
• Color
  gray
• Maximum load current
  52 A (for a 10 mm² rigid conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors.)
• Back of the hand protection
  guaranteed
• Surge voltage test setpoint
  9.8 kV
• Result of flexion and pull-out test
  Test passed
• Conductor cross section tensile test
  10 mm²
Result of tight fit on support
Test passed
Setpoint
5 N
Requirements, voltage drop
U1 ≤ 3.2 mV; U2 ≤ 1.5 x U1
Bending test turns
135
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
End cover width
2.2 mm
Stripping length
10 mm ... 12 mm
Conductor cross section AWG max.
8
Conductor cross section flexible, with ferrule with plastic sleeve min.
1 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 4.1
27141100
UNSPSC 11
39121410
Nominal cross section
6 mm²
Area of application
Railway industry
Maximum power dissipation for nominal condition
1.31 W
Nominal voltage UN
1000 V
Finger protection
guaranteed
Conductor cross section flexible, with ferrule without plastic sleeve min.
1 mm²
Rated surge voltage
8 kV
Result of surge voltage test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Connection
1 level
Conductor cross section flexible max.
10 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
2.5 mm² When using TWIN ferrules, we recommend a minimum ferrule length of 13 mm.
Internal cylindrical gage
A5
ECLASS 10.0.1
27141120
ECLASS 5.0
27141100
ETIM 4.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 19.0
39121410
Number of connections
3
Degree of pollution
3
Insulating material group
I
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Ageing test for screwless modular terminal block temperature cycles
192
Result of thermal test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Acceleration
30g
Test spectrum
Service life test category 2, bogie-mounted
Shock form
Half-sine
Height NS 35/15
51 mm
Connection in acc. with standard
CSA
Conductor cross section flexible min.
0.5 mm²
Potentials
1
Flammability rating according to UL 94
V0
Open side panel
Yes
Nominal current IN
41 A
Power frequency withstand voltage setpoint
2.2 kV
Tensile test result
Test passed
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Tractive force setpoint
90 N
Tight fit on carrier
NS 35
Result of voltage-drop test
Test passed
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Conductor cross section short circuit testing
6 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
ECLASS 11.0
27141120
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410
Height
42.2 mm
Connection method
Push-in connection
Conductor cross section solid max.
10 mm²
Conductor cross section solid min.
1 mm²
Connection cross sections directly pluggable
1 mm² 10 mm² 16 8
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 7.0
27141120
UNSPSC 18.0
39121410
ECLASS 4.0
27141100
ECLASS 9.0
27141120
Result of temperature-rise test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Length
74.2 mm
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Test duration per axis
5 h
Surface flammability NFPA 130 (ASTM E 162)
passed
Width
8.2 mm
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Ambient temperature (actuation)
-5 °C ... 70 °C
ETIM 7.0
EC000897
Shock test result
Test passed
Shock duration
18 ms
Number of shocks per direction
3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Short circuit stability result
Test passed
Short-time current
0.72 kA
ASD level
6.12 (m/s2)2/Hz
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
ECLASS 5.1
27141100
Result of aging test
Test passed
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2018-05
Static insulating material application in cold
-60 °C
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Oscillation, broadband noise test result
Test passed