3211771 Phoenix Contact Terminal Blocks

Product Details

• Stripping length
  10 mm ... 12 mm
• Conductor cross section flexible min.
  0.2 mm²
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Conductor cross section solid max.
  6 mm²
• Test frequency
  f1 = 5 Hz to f2 = 250 Hz
• Static insulating material application in cold
  -60 °C
• Conductor cross section AWG min.
  24
• ECLASS 6.0
  27141100
• ETIM 3.0
  EC000897
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  130 °C
• Conductor cross section flexible, with ferrule with plastic sleeve max.
  4 mm²
• Internal cylindrical gage
  A4
• Ambient temperature (storage/transport)
  -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
• China RoHS
  Environmentally friendly use period: unlimited = EFUP-e
• UNSPSC 7.0901
  39121410
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
  1 mm²
• Conductor cross section AWG max.
  10
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
  0.5 mm²
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• Conductor cross section flexible max.
  6 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 5.1
27141100
ETIM 7.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 21.0
39121410
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Max. AWG conductor cross section, flexible
12
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 10.0.1
27141120
UNSPSC 19.0
39121410
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 11.0
27141120
ECLASS 4.0
27141100
UNSPSC 6.01
30211811
UNSPSC 11
39121410
UNSPSC 18.0
39121410
ECLASS 4.1
27141100
ECLASS 9.0
27141120
ETIM 4.0
EC000897
UNSPSC 20.0
39121410
Color
gray
Degree of pollution
3
Overvoltage category
III
Nominal current IN
32 A
Result of power-frequency withstand voltage test
Test passed
Result of flexion and pull-out test
Test passed
Result of voltage-drop test
Test passed
Number of levels
1
Flammability rating according to UL 94
V0
Maximum power dissipation for nominal condition
1.02 W
Insulating material group
I
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Power frequency withstand voltage setpoint
2 kV
Bending test turns
135
Potentials
1
Area of application
Railway industry
Maximum load current
36 A (with 6 mm² conductor cross section, rigid)
Finger protection
guaranteed
Result of surge voltage test
Test passed
Bending test rotation speed
10 rpm
Tight fit on carrier
NS 35
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Proof of thermal characteristics (needle flame) effective duration
30 s
Rated surge voltage
8 kV
Nominal cross section
4 mm²
Open side panel
Yes
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of tight fit on support
Test passed
Short circuit stability result
Test passed
Ageing test for screwless modular terminal block temperature cycles
192
Acceleration
30g
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Surface flammability NFPA 130 (ASTM E 162)
passed
Tensile test result
Test passed
Short-time current
0.72 kA
Oscillation, broadband noise test result
Test passed
Test duration per axis
5 h
ASD level
6.12 (m/s2)2/Hz
Shock duration
18 ms
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection
1 level
Conductor cross section solid min.
0.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Connection cross sections directly pluggable
0.5 mm² 6 mm²
ECLASS 5.0
27141100
ECLASS 7.0
27141120
ETIM 6.0
EC000897
UNSPSC 12.01
39121410
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Shock test result
Test passed
Number of shocks per direction
3
Width
6.2 mm
Min. AWG conductor cross section, flexible
24
Back of the hand protection
guaranteed
Conductor cross section short circuit testing
6 mm²
Test spectrum
Service life test category 2, bogie-mounted
Height NS 35/7,5
36.5 mm
Connection in acc. with standard
CSA
ETIM 2.0
EC000897
Setpoint
1 N
Shock form
Half-sine
End cover width
2.2 mm
Nominal voltage UN
800 V
Result of aging test
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
66.5 mm
Connection method
Push-in connection
Number of connections
3
Insulating material
PA
Result of temperature-rise test
Test passed
Result of thermal test
Test passed
Height NS 35/15
44 mm