3211766 Phoenix Contact Terminal Blocks

3211766 Product Details

• ECLASS 5.1
  27141100
• UNSPSC 19.0
  39121410
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
  0.5 mm²
• ECLASS 5.0
  27141100
• ECLASS 7.0
  27141141
• ETIM 6.0
  EC000901
• UNSPSC 11
  39121410
• Ambient temperature (storage/transport)
  -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
• UNSPSC 21.0
  39121410
• ECLASS 9.0
  27141141
• UNSPSC 13.2
  39121410
• Conductor cross section flexible, with ferrule without plastic sleeve min.
  0.5 mm²
• Operating temperature
  -60 °C ... 105 °C (max. short-term operating temperature 130°C)
• Overvoltage category
  III
• Maximum load current
  with 6 mm² conductor cross section, rigid
• Finger protection
  guaranteed
• Acceleration
  30g
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Surface flammability NFPA 130 (ASTM E 162)
  passed
• Static insulating material application in cold
  -60 °C
Width
6.2 mm
Height
35.3 mm
Height NS 35/15
44 mm
Insulating material
PA
Conductor cross section AWG max.
10
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Internal cylindrical gage
A4
Back of the hand protection
guaranteed
Number of levels
1
Rated surge voltage
8 kV
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 6.0
27141100
ETIM 4.0
EC000901
UNSPSC 7.0901
39121410
UNSPSC 18.0
39121410
Flammability rating according to UL 94
V0
Degree of pollution
3
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Test spectrum
Service life test category 2, bogie-mounted
Test duration per axis
5 h
Shock duration
18 ms
Number of connections
2
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
End cover width
2.2 mm
Height NS 35/7,5
36.5 mm
Stripping length
10 mm ... 12 mm
Conductor cross section AWG min.
24
Max. AWG conductor cross section, flexible
12
Connection cross sections directly pluggable
0.5 mm² 6 mm²
ECLASS 10.0.1
27141141
Color
green-yellow
Insulating material group
I
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Connection
1 level
Conductor cross section solid max.
6 mm²
Conductor cross section flexible min.
0.2 mm²
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Note
Please observe the current carrying capacity of the DIN rails.
Connection in acc. with standard
CSA
Min. AWG conductor cross section, flexible
24
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
UNSPSC 12.01
39121410
Nominal cross section
4 mm²
Area of application
Railway industry
Open side panel
Yes
Oscillation, broadband noise test result
Test passed
Shock form
Half-sine
Number of shocks per direction
3
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 11.0
27141141
ECLASS 4.1
27141100
ETIM 7.0
EC000901
ASD level
6.12 (m/s2)2/Hz
Ambient temperature (actuation)
-5 °C ... 70 °C
ETIM 2.0
EC000901
ETIM 3.0
EC000901
UNSPSC 6.01
30211811
UNSPSC 20.0
39121410
Shock test result
Test passed
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Length
56 mm
Connection method
Push-in connection
Conductor cross section solid min.
0.5 mm²
Conductor cross section flexible max.
6 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e

Product condition