3211896 Phoenix Contact Terminal Blocks

Product Details

• Potentials
  1
• Insulating material
  PA
• Overvoltage category
  III
• Maximum load current
  28 A (with 4 mm² conductor cross section, rigid)
• Back of the hand protection
  guaranteed
• Power frequency withstand voltage setpoint
  2 kV
• Tensile test result
  Test passed
• Setpoint
  1 N
• Short-time current
  0.48 kA
• Ageing test for screwless modular terminal block temperature cycles
  192
• Test frequency
  f1 = 5 Hz to f2 = 150 Hz
• Shock test result
  Test passed
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
• Static insulating material application in cold
  -60 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R23
  HL 1 - HL 3
• Conductor cross section flexible, with ferrule with plastic sleeve min.
  0.34 mm²
• Operating temperature
  -60 °C ... 105 °C (max. short-term operating temperature 130°C)
• Ambient temperature (assembly)
  -5 °C ... 70 °C
• ECLASS 11.0
  27141120
• ECLASS 5.1
  27141100
ETIM 2.0
EC000897
ETIM 7.0
EC000897
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410
Number of connections
3
Nominal cross section
2.5 mm²
Insulating material group
I
Open side panel
Yes
Finger protection
guaranteed
Bending test rotation speed
10 rpm
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of thermal test
Test passed
Oscillation, broadband noise test result
Test passed
Acceleration
5g
Shock form
Half-sine
Shock duration
30 ms
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Number of levels
1
Rated surge voltage
8 kV
Maximum power dissipation for nominal condition
0.77 W
Nominal voltage UN
800 V
Result of surge voltage test
Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test turns
135
Result of tight fit on support
Test passed
Result of voltage-drop test
Test passed
Short circuit stability result
Test passed
Result of aging test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
ASD level
0.02 g²/Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Number of shocks per direction
3
Surface flammability NFPA 130 (ASTM E 162)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
End cover width
2.2 mm
Connection
1 level
Stripping length
8 mm ... 10 mm
Conductor cross section AWG min.
26
Color
gray
Flammability rating according to UL 94
V0
Nominal current IN
24 A
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Result of power-frequency withstand voltage test
Test passed
Result of flexion and pull-out test
Test passed
Tight fit on carrier
NS 35
Result of temperature-rise test
Test passed
Conductor cross section short circuit testing
4 mm²
Proof of thermal characteristics (needle flame) effective duration
30 s
Test spectrum
Service life test category 1, class B, body mounted
Test duration per axis
5 h
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Width
5.2 mm
Height NS 35/7,5
43 mm
Connection in acc. with standard
CSA
Conductor cross section solid min.
0.34 mm²
Min. AWG conductor cross section, flexible
26
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Connection cross sections directly pluggable
0.34 mm² 4 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 5.0
27141100
ECLASS 7.0
27141120
ETIM 3.0
EC000897
ETIM 6.0
EC000897
UNSPSC 18.0
39121410
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Length
49 mm
Height NS 35/15
50.5 mm
Connection method
Push-in connection
Conductor cross section AWG max.
12
Conductor cross section flexible min.
0.14 mm²
Max. AWG conductor cross section, flexible
14
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.0
27141100
ECLASS 4.1
27141100
ETIM 4.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 12.01
39121410
UNSPSC 19.0
39121410
Conductor cross section solid max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.34 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Internal cylindrical gage
A3
Ambient temperature (actuation)
-5 °C ... 70 °C
ECLASS 10.0.1
27141120
ECLASS 6.0
27141100
ECLASS 9.0
27141120
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
UNSPSC 21.0
39121410