3211919 Phoenix Contact Terminal Blocks

Product Details

• Color
  gray
• Overvoltage category
  III
• Open side panel
  Yes
• Back of the hand protection
  guaranteed
• Power frequency withstand voltage setpoint
  2 kV
• Number of levels
  1
• Flammability rating according to UL 94
  V0
• Insulating material group
  I
• Result of surge voltage test
  Test passed
• Result of the test for mechanical stability of terminal points (5 x conductor connection)
  Test passed
• Bending test conductor cross section/weight
  0.2 mm² / 0.2 kg
• Result of voltage-drop test
  Test passed
• Result of temperature-rise test
  Test passed
• Ageing test for screwless modular terminal block temperature cycles
  192
• Shock test result
  Test passed
• Static insulating material application in cold
  -60 °C
• Fire protection for rail vehicles (DIN EN 45545-2) R22
  HL 1 - HL 3
• Fire protection for rail vehicles (DIN EN 45545-2) R26
  HL 1 - HL 3
• Connection
  1 level
• Conductor cross section solid min.
  0.5 mm²
Min. AWG conductor cross section, flexible
24
Conductor cross section flexible, with ferrule without plastic sleeve max.
4 mm²
Nominal cross section
4 mm²
Maximum power dissipation for nominal condition
1.02 W
Nominal voltage UN
800 V
Result of power-frequency withstand voltage test
Test passed
Bending test rotation speed
10 rpm
Conductor cross section short circuit testing
6 mm²
Proof of thermal characteristics (needle flame) effective duration
30 s
Oscillation, broadband noise test result
Test passed
ASD level
1.857 (m/s2)2/Hz
Test duration per axis
5 h
Shock form
Half-sine
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Width
6.2 mm
Height NS 35/15
44 mm
Stripping length
10 mm ... 12 mm
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
1 mm²
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 4.1
27141100
ECLASS 4.0
27141100
ECLASS 7.0
27141127
ETIM 7.0
EC000903
UNSPSC 6.01
30211811
UNSPSC 21.0
39121410
Note
The max. current is determined by the diode. Installed: diode 1N 5408, reverse voltage: 1000 V, maximum continuous current: 1.5 A
Number of connections
4
Insulating material
PA
Degree of pollution
3
Maximum load current
1.5 A (with 6 mm² conductor cross section, rigid)
Result of flexion and pull-out test
Test passed
Result of tight fit on support
Test passed
Short-time current
0.72 kA
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Shock duration
30 ms
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Length
77 mm
Height NS 35/7,5
36.5 mm
Conductor cross section AWG min.
24
Max. AWG conductor cross section, flexible
12
Conductor cross section flexible max.
6 mm²
Internal cylindrical gage
A4
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (assembly)
-5 °C ... 70 °C
Connection in acc. with standard
CSA
ECLASS 5.0
27141100
ETIM 4.0
EC000903
UNSPSC 7.0901
39121410
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
Potentials
1
Rated surge voltage
8 kV
Nominal current IN
1.5 A
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Finger protection
guaranteed
Tensile test result
Test passed
Setpoint
1 N
Short circuit stability result
Test passed
Result of thermal test
Test passed
Acceleration
5g
Test directions
X-, Y- and Z-axis (pos. and neg.)
Number of shocks per direction
3
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Bending test turns
135
Tight fit on carrier
NS 35
Result of aging test
Test passed
Test spectrum
Service life test category 1, class B, body mounted
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
End cover width
2.2 mm
Connection method
Push-in connection
Conductor cross section solid max.
6 mm²
Conductor cross section AWG max.
10
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Connection cross sections directly pluggable
0.5 mm² 6 mm²
Ambient temperature (actuation)
-5 °C ... 70 °C
REACh SVHC
Lead 7439-92-1
ECLASS 11.0
27141127
ECLASS 5.1
27141100
ECLASS 6.0
27141100
ETIM 3.0
EC000897
UNSPSC 11
39121410
UNSPSC 19.0
39121410
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Permissible humidity (storage/transport)
30 % ... 70 %
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
ECLASS 10.0.1
27141127
ETIM 2.0
EC000897
ECLASS 9.0
27141127
ETIM 6.0
EC000903
UNSPSC 18.0
39121410
UNSPSC 20.0
39121410