3211456 Phoenix Contact Terminal Blocks

Product Details

• Number of connections
  4
• Insulating material
  PA
• Note
  The operating voltage is determined by the LED display version. Key data LED 12 V DC - 30 V DC, 0.7 mA - 2.4 mA
• Nominal cross section
  2.5 mm²
• Rated surge voltage
  4 kV
• Nominal current IN
  20 A
• Number of levels
  2
• Flammability rating according to UL 94
  V0
• Maximum load current
  24 A (with 4 mm² conductor cross section, rigid)
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Bending test rotation speed
  10 rpm
• Tractive force setpoint
  60 N
• Tight fit on carrier
  NS 35
• Requirements, voltage drop
  ≤ 3.2 mV
• Conductor cross section short circuit testing
  4 mm²
• Ageing test for screwless modular terminal block temperature cycles
  192
• ASD level
  1.857 (m/s2)2/Hz
• Test duration per axis
  5 h
• Shock form
  Half-sine
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Height NS 35/7,5
47.5 mm
Degree of pollution
3
Maximum power dissipation for nominal condition
0.77 W (the value is multiplied when connecting multiple levels)
Nominal voltage UN
500 V (the operating voltage is determined by the selected LED version)
Surge voltage test setpoint
4.8 kV
Result of flexion and pull-out test
Test passed
Tensile test result
Test passed
Conductor cross section tensile test
4 mm²
Result of voltage-drop test
Test passed
Short-time current
0.48 kA
Proof of thermal characteristics (needle flame) effective duration
30 s
Test spectrum
Service life test category 1, class B, body mounted
Shock test result
Test passed
Relative insulation material temperature index (Elec.; UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
5.2 mm
Length
68 mm
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.14 mm²
Internal cylindrical gage
A3
ECLASS 5.1
27141100
ECLASS 9.0
27141120
UNSPSC 12.01
39121410
Color
gray
Insulating material group
I
Back of the hand protection
guaranteed
Result of power-frequency withstand voltage test
Test passed
Bending test turns
135
Result of tight fit on support
Test passed
Result of temperature-rise test
Test passed
Result of aging test
Test passed
Result of thermal test
Test passed
Test directions
X-, Y- and Z-axis (pos. and neg.)
Number of shocks per direction
3
Surface flammability NFPA 130 (ASTM E 162)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Connection method
Push-in connection
Conductor cross section flexible max.
4 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.5 mm²
ECLASS 4.0
27141100
ETIM 2.0
EC000897
ETIM 7.0
EC000897
UNSPSC 18.0
39121410
Overvoltage category
III
Connection in acc. with standard
CSA
Result of surge voltage test
Test passed
Finger protection
guaranteed
Power frequency withstand voltage setpoint
1.5 kV
Oscillation, broadband noise test result
Test passed
Acceleration
5g
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock duration
30 ms
Static insulating material application in cold
-60 °C
End cover width
2.2 mm
Conductor cross section solid max.
4 mm²
Conductor cross section AWG max.
12
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
ECLASS 10.0.1
27141120
ECLASS 5.0
27141100
ETIM 6.0
EC000897
UNSPSC 7.0901
39121410
UNSPSC 13.2
39121410
UNSPSC 19.0
39121410
Open side panel
Yes
Checking the mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test conductor cross section/weight
0.14 mm² / 0.2 kg
Setpoint
1 N
Short circuit stability result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test frequency
f1 = 5 Hz to f2 = 150 Hz
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Height NS 35/15
55 mm
Conductor cross section solid min.
0.14 mm²
Conductor cross section AWG min.
26
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Stripping length
8 mm ... 10 mm
ECLASS 11.0
27141120
ECLASS 6.0
27141100
ETIM 4.0
EC000897
UNSPSC 6.01
30211811
UNSPSC 11
39121410
UNSPSC 20.0
39121410
UNSPSC 21.0
39121410
Conductor cross section flexible min.
0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.14 mm²
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
ECLASS 4.1
27141100
ECLASS 7.0
27141127
ETIM 3.0
EC000897