3076714 Phoenix Contact Terminal Blocks
Part#:3076714
Manufacturer:Phoenix Contact
Product Lifecycle:Active
Get a quick Quote!
Test disconnect terminal block, nom. voltage: 800 V, nominal current: 50 A, connection method: Bolt connection, length: 80.8 mm, width: 13 mm, color: gray, mounting: NS 35/7,5, NS 35/15
About the manufacturer: Phoenix Contact is one of the manufacturers that offers Terminal Blocks that you can order at Quotebeam.com. Phoenix Contact manufactures industrial electrical and electronic technology products that offer power, protection, connectivity, and automation for systems and equipment.
Check out the 3076714 Phoenix Contact price in the box on the right side or send a quick quote.
Product Details
- Color gray
- Rated surge voltage 8 kV
- Maximum power dissipation for nominal condition 1.82 W
- Power frequency withstand voltage setpoint 2 kV
- Result of voltage-drop test Test passed
- Conductor cross section short circuit testing 10 mm²
- Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03
- Test directions X-, Y- and Z-axis (pos. and neg.)
- Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
- Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg
- Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3
- Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3
- Pitch 13 mm
- Cable lug connection according to standard DIN 46237:1970-07
- Max. cross section for cable lug connection 6 mm²
- Hole diameter, min. 5.3 mm
- Nominal cross section 10 mm²
- Degree of pollution 3
- Open side panel Yes
- Nominal voltage UN 800 V (with open 630 V disconnect point)
- Requirement temperature-rise test Increase in temperature ≤ 45 K
- Result of thermal test Test passed
- Test spectrum Service life test category 1, class B, body mounted
- ASD level 1.857 (m/s2)2/Hz
- Shock form Half-sine
- Static insulating material application in cold -60 °C
- Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3
- Length 80.8 mm
- End cover width 2.2 mm
- Screw thread M5
- AWG min 20
- Min. cross section for cable lug connection 0.5 mm²
- Tightening torque, min 2 Nm
- Ambient temperature (assembly) -5 °C ... 70 °C
- REACh SVHC Lead 7439-92-1
- ECLASS 6.0 27141100
- ETIM 3.0 EC000902
- UNSPSC 6.01 30211811
- UNSPSC 12.01 39121410
- UNSPSC 19.0 39121410
- Number of levels 1
- Potentials 1
- Flammability rating according to UL 94 V0
- Result of surge voltage test Test passed
- Result of tight fit on support Test passed
- Result of temperature-rise test Test passed
- Short circuit stability result Test passed
- Oscillation, broadband noise test result Test passed
- Shock test result Test passed
- Shock duration 30 ms
- Number of shocks per direction 3
- Specific optical density of smoke NFPA 130 (ASTM E 662) passed
- Smoke gas toxicity NFPA 130 (SMP 800C) passed
- Width 13 mm
- Height NS 35/15 57.3 mm
- Height NS 35/7,5 49.8 mm
- Connection in acc. with standard CUL
- AWG max 10
- Cable lug width, max. 10 mm
- Tightening torque max 2.2 Nm
- ECLASS 10.0.1 27141126
- ECLASS 4.1 27141100
- ECLASS 7.0 27141126
- ECLASS 9.0 27141126
- ETIM 7.0 EC000902
- UNSPSC 7.0901 39121410
- Number of connections 2
- Overvoltage category III
- Nominal current IN 50 A
- Result of power-frequency withstand voltage test Test passed
- Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed
- Short-time current 1.2 kA
- Acceleration 5g
- Insulating material PA
- Insulating material group I
- Maximum load current 50 A (with 10 mm² conductor cross section)
- Setpoint 5 N
- Tight fit on carrier NS 32/NS 35
- Proof of thermal characteristics (needle flame) effective duration 30 s
- Test frequency f1 = 5 Hz to f2 = 150 Hz
- Test duration per axis 5 h
- Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03
- Relative insulation material temperature index (Elec., UL 746 B) 130 °C
- Surface flammability NFPA 130 (ASTM E 162) passed
- Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3
- Connection 1 level
- Connection method Bolt connection
- Stripping length The stripping length depends on the specification provided by the cable lug manufacturer.
- Bolt diameter 5 mm
- Permissible humidity (storage/transport) 30 % ... 70 %
- Ambient temperature (actuation) -5 °C ... 70 °C
- ECLASS 4.0 27141100
- ECLASS 11.0 27141126
- ETIM 2.0 EC000902
- ETIM 4.0 EC000902
- UNSPSC 11 39121410
- UNSPSC 18.0 39121410
- UNSPSC 21.0 39121410
- Ambient temperature (storage/transport) -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
- Operating temperature -60 °C ... 105 °C (max. short-term operating temperature 130°C)
- China RoHS Environmentally Friendly Use Period = 50 years
- ECLASS 5.0 27141100
- ECLASS 5.1 27141100
- ETIM 6.0 EC000902
- UNSPSC 13.2 39121410
- UNSPSC 20.0 39121410
Product condition
ORIGINAL PACKAGING
SURPLUS ORIGINAL PACKAGING - 100% unused and in original packaging
1-year warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
By purchasing this item, you agree to the Terms & Conditions
Quotebeam is NOT an authorized distributor of Phoenix Contact
Shipping and Delivery Worldwide
calculate costs and time
Secure Payment Processing
with money back guarantee
1 year warranty
on all parts
Responsive Customer Support
we're here to help!
Need more details?
Feel free to chat with us or check our FAQ
Phoenix Contact Disclaimer:
The product is unused surplus. Quotebeam is not an authorized surplus dealer or affiliate for the Manufacturer of this product. Products may feature older date codes or be from an earlier series than what is currently available from the manufacturer or authorized dealers. Because Quotebeam is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Phoenix Contact Controls products will have firmware already installed, Quotebeam makes no representation as to whether a Controls product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Quotebeam also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Phoenix Contact, its distributors, or any other source. Quotebeam also makes no representations as to your right to install any such firmware on the product. Quotebeam will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Relevant products
Do you have questions?
We’re here for you ✨
We are a proud member of:
