3076028 Phoenix Contact Terminal Blocks

Product Details

• Number of levels
  3
• Nominal cross section
  4 mm²
• Degree of pollution
  3
• Open side panel
  Yes
• Power frequency withstand voltage setpoint
  1.89 kV
• Bending test conductor cross section/weight
  0.2 mm² / 0.2 kg
• Requirement temperature-rise test
  Increase in temperature ≤ 45 K
• Ageing test for screwless modular terminal block temperature cycles
  192
• Test directions
  X-, Y- and Z-axis (pos. and neg.)
• Test duration per axis
  5 h
• Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
  125 °C
• Number of connections
  5
• Flammability rating according to UL 94
  V0
• Insulating material group
  I
• Shock protection test specification
  DIN EN 50274 (VDE 0660-514):2002-11
• Bending test rotation speed
  10 rpm
• Setpoint
  1 N
• Short-time current
  0.48 kA
• Test specification, oscillation, broadband noise
  DIN EN 50155 (VDE 0115-200):2008-03
• Test specification, shock test
  DIN EN 50155 (VDE 0115-200):2008-03
Shock form
Half-sine
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Height NS 35/7,5
51.5 mm
Tightening torque max
0.6 Nm
Min. AWG conductor cross section, flexible
24
Insulating material
PA
Nominal current IN
24 A (with 4 mm² conductor cross section)
Result of flexion and pull-out test
Test passed
Result of surge voltage test
Test passed
Result of power-frequency withstand voltage test
Test passed
Tight fit on carrier
NS 35
Short circuit stability result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Acceleration
30g
Number of shocks per direction
3
Note
Please observe the current carrying capacity of the DIN rails.
Color
gray
Overvoltage category
III
Maximum power dissipation for nominal condition
1.02 W (the value is multiplied when connecting multiple levels)
Finger protection
guaranteed
Tensile test result
Test passed
Number of positions
1
Potentials
2
Rated surge voltage
4 kV
Maximum load current
30 A (with 4 mm² conductor cross section and 3-pos. terminal block)
Nominal voltage UN
400 V (phase conductor/phase conductor)
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
End cover width
2.2 mm
Connection method
Screw connection
Conductor cross section solid max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Screw thread
M3
Height
51.2 mm
Tightening torque, min
0.5 Nm
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
0.75 mm²
ECLASS 10.0.1
27141125
ECLASS 5.0
27141100
ETIM 3.0
EC000897
UNSPSC 6.01
30211811
ETIM 6.0
EC001329
Result of voltage-drop test
Test passed
Result of thermal test
Test passed
Result of aging test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Length
93.5 mm
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Result of tight fit on support
Test passed
ASD level
6.12 (m/s2)2/Hz
Shock test result
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Conductor cross section solid min.
0.2 mm²
Max. AWG conductor cross section, flexible
12
2 conductors with same cross section, solid max.
1.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
ECLASS 7.0
27141125
UNSPSC 13.2
39121410
UNSPSC 20.0
39121410
Conductor cross section short circuit testing
4 mm²
Oscillation, broadband noise test result
Test passed
Stripping length
9 mm
Conductor cross section AWG min.
24
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 4.0
27141100
ECLASS 11.0
27141125
UNSPSC 11
39121410
Bending test turns
135
Result of temperature-rise test
Test passed
Shock duration
18 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Conductor cross section flexible max.
4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
0.75 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Permissible humidity (storage/transport)
30 % ... 70 %
ECLASS 5.1
27141100
ECLASS 6.0
27141100
UNSPSC 18.0
39121410
UNSPSC 19.0
39121410
Back of the hand protection
guaranteed
Static insulating material application in cold
-60 °C
Width
5.2 mm
Height NS 35/15
59 mm
Conductor cross section flexible min.
0.2 mm²
Conductor cross section AWG max.
12
2 conductors with same cross section, solid min.
0.2 mm²
Internal cylindrical gage
A3
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
China RoHS
Environmentally Friendly Use Period = 50 years
ECLASS 9.0
27141125
UNSPSC 12.01
39121410
UNSPSC 21.0
39121410
Connection
1st, 2nd and 3rd level
2 conductors with same cross section, stranded min.
0.2 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
ECLASS 4.1
27141100
ETIM 4.0
EC001329
ETIM 7.0
EC001329
UNSPSC 7.0901
39121410