3076029 Phoenix Contact Terminal Blocks

Product Details

• China RoHS
  Environmentally Friendly Use Period = 50 years
• ECLASS 6.0
  27141100
• UNSPSC 7.0901
  39121410
• ETIM 7.0
  EC001329
• Result of power-frequency withstand voltage test
  Test passed
• Result of tight fit on support
  Test passed
• Result of temperature-rise test
  Test passed
• Short circuit stability result
  Test passed
• Acceleration
  30g
• Test duration per axis
  5 h
• Number of shocks per direction
  3
• Specific optical density of smoke NFPA 130 (ASTM E 662)
  passed
• Height NS 35/7,5
  51.5 mm
• Height
  51.2 mm
• Conductor cross section AWG max.
  12
• Conductor cross section flexible, with ferrule with plastic sleeve min.
  0.25 mm²
• Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, maximum
  0.75 mm²
• ECLASS 4.0
  27141100
• ETIM 3.0
  EC000897
• UNSPSC 18.0
  39121410
UNSPSC 13.2
39121410
Power frequency withstand voltage setpoint
1.89 kV
Bending test turns
135
Result of voltage-drop test
Test passed
Conductor cross section short circuit testing
4 mm²
Ageing test for screwless modular terminal block temperature cycles
192
ASD level
6.12 (m/s2)2/Hz
Test directions
X-, Y- and Z-axis (pos. and neg.)
Static insulating material application in cold
-60 °C
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Connection
1st, 2nd and 3rd level
Conductor cross section solid max.
4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
ECLASS 5.1
27141100
ECLASS 11.0
27141125
ETIM 6.0
EC001329
UNSPSC 21.0
39121410
Result of the test for mechanical stability of terminal points (5 x conductor connection)
Test passed
Bending test conductor cross section/weight
0.2 mm² / 0.2 kg
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Result of thermal test
Test passed
Test spectrum
Service life test category 2, bogie-mounted
Test frequency
f1 = 5 Hz to f2 = 250 Hz
Shock form
Half-sine
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
125 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Width
5.2 mm
ECLASS 4.1
27141100
ECLASS 9.0
27141125
ETIM 4.0
EC001329
UNSPSC 12.01
39121410
UNSPSC 20.0
39121410
Result of flexion and pull-out test
Test passed
Tight fit on carrier
NS 35
Short-time current
0.48 kA
Result of aging test
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock duration
18 ms
Surface flammability NFPA 130 (ASTM E 162)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
End cover width
2.2 mm
Length
93.5 mm
Connection method
Screw connection
Tightening torque, min
0.5 Nm
Tightening torque max
0.6 Nm
Conductor cross section flexible min.
0.2 mm²
Min. AWG conductor cross section, flexible
24
2 conductors with same cross section, stranded min.
0.2 mm²
2 conductors with same cross section, stranded max.
1.5 mm²
Operating temperature
-60 °C ... 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (storage/transport)
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (assembly)
-5 °C ... 70 °C
ECLASS 7.0
27141125
ECLASS 5.0
27141100
UNSPSC 6.01
30211811
UNSPSC 11
39121410
UNSPSC 19.0
39121410
Color
gray
Bending test rotation speed
10 rpm
Setpoint
1 N
Tensile test result
Test passed
Oscillation, broadband noise test result
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Shock test result
Test passed
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Height NS 35/15
59 mm
Screw thread
M3
Conductor cross section solid min.
0.2 mm²
Max. AWG conductor cross section, flexible
12
Conductor cross section flexible, with ferrule without plastic sleeve max.
2.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
2.5 mm²
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, maximum
0.75 mm²
Potentials
2
Rated surge voltage
4 kV
Maximum power dissipation for nominal condition
1.02 W (the value is multiplied when connecting multiple levels)
Back of the hand protection
guaranteed
Number of levels
3
Degree of pollution
3
ECLASS 10.0.1
27141125
Flammability rating according to UL 94
V0
Nominal current IN
24 A (with 4 mm² conductor cross section)
Maximum load current
30 A (with 4 mm² conductor cross section and 3-pos. terminal block)
Finger protection
guaranteed
2 conductors with same cross section, solid max.
1.5 mm²
Two conductors with the same cross section, flexible, with TWIN ferrules, with plastic sleeve, minimum
0.5 mm²
Nominal cross section
4 mm²
Insulating material group
I
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Stripping length
9 mm
Conductor cross section flexible max.
4 mm²
Number of connections
5
Insulating material
PA
Nominal voltage UN
400 V (phase conductor/phase conductor)
Note
Please observe the current carrying capacity of the DIN rails.
Conductor cross section AWG min.
24
2 conductors with same cross section, solid min.
0.2 mm²
Internal cylindrical gage
A3
Overvoltage category
III
Open side panel
Yes
Result of surge voltage test
Test passed
Two conductors with the same cross section stranded, with ferrule and without plastic sleeve, minimum
0.25 mm²
Permissible humidity (storage/transport)
30 % ... 70 %